Precise K580VM80A (i8080) Verilog model by Vslav is used in this project. Some modules from Vector06cc and Bashkiria 2M were used.
Features:
- Fully functional Vector 06C with presice timings
- 3MHz(original) and 6MHz(turbo) speeds for CPU.
- 320KB RAM (including 256KB of Quasi-disk)
- Following file formats are supported:
- ROM: simple tape backup (loading from 0x100 address)
- FDD: floppy dump (read/write)
- EDD: Quasi-disk dump
- All known joystick connections: 2xP, 1xPU(USPID), 2xS
- Specially developed i8253 module for better compatibility.
- AY8910/YM2149 sound
- Optional loadable BOOT ROM (up to 32KB)
- Z80 CPU (experimental)
Keep in mind Z80 CPU is not original CPU for Vector 06C, so not all applications can work correctly with this CPU. No additional hardware for ZX emulator supported. Use ZX Spectrum core if you want Spectrum.
Installation:
Copy the *.rbf file at the root of the SD card. You can rename the file to core.rbf if you want the MiST to load it automatically at startup.
Copy vector06.rom to the root of SD card if you wish to use another BOOT ROM (up to 32KB).
For PAL mode (RGBS output) you need to put mist.ini file to the root of SD card. Set the option scandoubler_disable for desired video output.
Keyboard map:
- F12 - OSD menu.
- CTRL-F11 - Reset to Boot ROM (don't clean the memory).
- SHIFT-F11 - Reset to Boot ROM (various additional keys are supported (F1-F5) depending on BOOT ROM functions).
- ALT-F11 - Enter to application.
- ALT - Rus/Lat
- ESC - AP2
- CRTL - US
- SHIFT - SS
Additional usage notes
- ROM files are started automatically after loading.
- After loading FDD or EDD files, BOOT ROM will be activated. You need to press ALT-F11 to start the disk if it's bootable. If disk is not bootable then you need to load additionally EDD or ROM file with MicroDOS and then follow the MicroDOS guide.
- Some applications on disks require Quasi-disk to be formatted (and refuse to work if not). In this case, you need to hold CTRL and shortly press ALT+F11 key combination to automatically format Quasi-disk at MiscroDOS startup.
- If both EDD and FDD are loaded then EDD has priority by default. To switch to FDD you need to hold down SHIFT+F1+F2 and quickly press F11
Download precompiled binaries:
Go to releases folder.