Smiley Secure Protocol nodejs implementation

Introduction

This library allows you to manipulate bill acceptors and note validators under SSP. Written by Innovative Technologies SSP manual

Maintained devices:

• NV10
• NV9 //preparing

Installation

npm install ssp

Usage

var ssp = require('ssp');
var notes = {
  1:"200KZT",
  2:"500KZT",
  3:"1000KZT",
  4:"2000KZT",
  5:"5000KZT",
  6:"10000KZT"
};
ssp = new ssp({
  device: '/dev/ttyACM0', //device address
  type: "nv10usb", //device type
  currencies:[0,1,1,1,1,0] //currencies types acceptable. Here all but 200KZT
});

ssp.init(function(){
  ssp.on('ready', function(){
    console.log("Device is ready");
    ssp.enable();
  });
  ssp.on('read_note', function(note){
    if(note>0) {
      console.log("GOT",notes[note]);
      if(note === 3) {
        // suddenly we decided that we don't need 1000 KZT
        ssp.commands.exec("reject_banknote");
      }
    }
  });
  ssp.on('disable', function(){
    console.log("disabled");
  });
  ssp.on('note_cleared_from_front', function(note){
    console.log("note_cleared_from_front");
  });
  ssp.on('note_cleared_to_cashbox', function(note){
    console.log("note_cleared_to_cashbox");
  });
  ssp.on('credit_note', function(note){
    console.log("CREDIT",notes[note]);
  });
  ssp.on("safe_note_jam", function(note){
    console.log("Jammed",note);
    //TODO: some notifiaction, recording, etc.
  });
  ssp.on("unsafe_note_jam", function(note){
    console.log("Jammed inside",note);
    //TODO: some notifiaction, recording, etc.
  });
  ssp.on("fraud_attempt", function(note){
    console.log("Fraud!",note);
    //TODO: some notifiaction, recording, etc.
  });
  ssp.on("stacker_full", function(note){
    console.log("I'm full, do something!");
    ssp.disable();
    //TODO: some notifiaction, recording, etc.
  });
  ssp.on("note_rejected", function(reason){
    console.log("Rejected!",reason);
  });
  ssp.on("error", function(err){
    console.log(err.code, err.message);
  });
});

Properties

• commands - Generated on creation command-interface for sending command or stack of commands to device

Methods

• init([enableOnInit],[callback]) - Initializes device, in case of an error emits error event. Can take boolean as a first argument which defines whether enable or not a device on init, second argument is callback, which has possible exception;
• enable([callback]) - Enables device. Callback may be as an argument to supply asynchrony
• disable([callback]) - Disables device. Callback may be as an argument to supply asynchrony
• commands.{command} - device`s commands binds as a methods to commands interface and can be chained in execution stack like _ssp.commands.enable().display_off().eventack() and then executed via exec method
• commands.exec([command], [callback]) - executes command stack. Method has optional command parameter which if passed made to the end of command stack, and a callback.

Events

• ready - emits when device is ready for data.
• close - emits on device closes. e.g. disconnected
• error - emits when error occures. Has error object as an argument of a callback
• other events supported by SSP protocol like slave_reset, read_note, credit_note, note_rejecting, note_stacking, disabled et.c.

Thanks to

Contributors:

• Olexandr Vandalko