With an STM32 board with Ethernet compatibility, this library allows a STM32 board (NUCLEO, DISCOVERY, ...) to connect to the internet.
This library follows the Ethernet API from Arduino.
For more information about it please visit: http://www.arduino.cc/en/Reference/Ethernet
This library is based on LwIP, a Lightweight TCP/IP stack, available here:
http://git.savannah.gnu.org/cgit/lwip.git
The LwIP has been ported as Arduino library and is available thanks Arduino Library Manager.
Source: https://github.com/stm32duino/LwIP
The LwIP has several user defined options, which is specified from within the lwipopts.h file.
This library provides a default user defined options file named lwipopts_default.h.
User can provide his own defined options at sketch level by adding his configuration in a file named STM32lwipopts.h or
extend the default one by adding some extra configuration in a file named lwipopts_extra.h.
There are alternative inits of the Ethernet interface with following orders:
Ethernet.begin();
Ethernet.begin(ip);
Ethernet.begin(ip, subnet);
Ethernet.begin(ip, subnet, gateway);
Ethernet.begin(ip, subnet, gateway, dns);This is more logical. A MAC address is no more needed and will retrieved internally by the mbed MAC address!
You can get the MAC address with following function, this must be done after Ethernet.Begin()
uint8_t *mac;
Ethernet.begin();
Ethernet.MACAddress(mac);You can also set a new user based MAC address, this must be done before Ethernet.begin()
uint8_t newMAC[] = {0x00, 0x80, 0xE1, 0x01, 0x01, 0x01};
Ethernet.setMACAddress(newMAC);
Ethernet.begin();EthernetClass::maintain() in no more required to renew IP address from DHCP.
It is done automatically by the LwIP stack in a background task.
An Idle task is required by the LwIP stack to handle timer and data reception.
This idle task is called inside a timer callback each 1 ms by the
function stm32_eth_scheduler().
A DEFAULT_ETHERNET_TIMER is set in the library to TIM14.
DEFAULT_ETHERNET_TIMER can be redefined in the core variant.
Be careful to not lock the system in a function which disabling IRQ.
Call Ethernet::schedule() performs an update of the LwIP stack.
You can find information at https://github.com/stm32duino/Arduino_Core_STM32/wiki/STM32Ethernet