A Node.js module for implementing BLE (Bluetooth Low Energy) peripherals.
Need a BLE central module? See noble.
Note: Starting with version 0.6 bleno is basing on ES6 classes and supports Node.js 14.x and higher only. For older versions of Node.js use bleno 0.5.x.
Note: macOS / Mac OS X, Linux, FreeBSD and Windows are currently the only supported OSes.
Please refer to https://github.com/stoprocent/node-bluetooth-hci-socket#uartserial-any-os
$ export BLUETOOTH_HCI_SOCKET_UART_PORT=/dev/tty...
$ export BLUETOOTH_HCI_SOCKET_UART_BAUDRATE=1000000
NOTE: BLUETOOTH_HCI_SOCKET_UART_BAUDRATE
defaults to 1000000
so only needed if different.
const bleno = require('@stoprocent/bleno');
bindParams
)$ export BLUETOOTH_HCI_SOCKET_FORCE_UART=1
const bleno = require('@stoprocent/bleno/with-custom-binding') ( {
bindParams: {
uart: {
port: '/dev/tty...',
baudRate: 1000000
}
}
} );
xcode-select --install
libbluetooth-dev
bluetoothd
disabled, if BlueZ 5.14 or later is installed. Use sudo hciconfig hci0 up
to power Bluetooth adapter up after stopping or disabling bluetoothd
.
System V
:
sudo service bluetooth stop
(once)sudo update-rc.d bluetooth remove
(persist on reboot)systemd
sudo systemctl stop bluetooth
(once)sudo systemctl disable bluetooth
(persist on reboot)If you're using noble and bleno at the same time, connected BLE devices may not be able to retrieve a list of services from the BLE adaptor. Check out noble's documentation on bleno compatibility
sudo apt-get install bluetooth bluez libbluetooth-dev libudev-dev libusb-1.0-0-dev
Make sure node
is on your path, if it's not, some options:
nodejs
to node
: sudo ln -s /usr/bin/nodejs /usr/bin/node
sudo yum install bluez bluez-libs bluez-libs-devel
See Configure Intel Edison for Bluetooth LE (Smart) Development
Make sure you have GNU Make:
sudo pkg install gmake
Disable automatic loading of the default Bluetooth stack by putting no-ubt.conf into /usr/local/etc/devd/no-ubt.conf
and restarting devd (sudo service devd restart
).
Unload ng_ubt
kernel module if already loaded:
sudo kldunload ng_ubt
Make sure you have read and write permissions on the /dev/usb/*
device that corresponds to your Bluetooth adapter.
npm install bleno@npm:@stoprocent/bleno
var bleno = require('bleno');
See examples folder for code examples.
bleno.setAddress('00:11:22:33:44:55'); // set adapter's mac address
NOTE: Curently this feature is only supported on HCI as it's using vendor specific commands. Source of the commands is based on the BlueZ bdaddr.c.
NOTE: bleno.state
must be poweredOn
before address can be set. bleno.on('stateChange', callback(state));
can be used to listen for state change events.
NOTE: bleno.state
must be poweredOn
before advertising is started. bleno.on('stateChange', callback(state));
can be used register for state change events.
var name = 'name';
var serviceUuids = ['fffffffffffffffffffffffffffffff0']
bleno.startAdvertising(name, serviceUuids[, callback(error)]);
Note:: there are limits on the name and service UUID's
var uuid = 'e2c56db5dffb48d2b060d0f5a71096e0';
var major = 0; // 0x0000 - 0xffff
var minor = 0; // 0x0000 - 0xffff
var measuredPower = -59; // -128 - 127
bleno.startAdvertisingIBeacon(uuid, major, minor, measuredPower[, callback(error)]);
Notes::
var scanData = Buffer.alloc(...); // maximum 31 bytes
var advertisementData = Buffer.alloc(...); // maximum 31 bytes
bleno.startAdvertisingWithEIRData(advertisementData[, scanData, callback(error)]);
bleno.stopAdvertising([callback]);
Set the primary services available on the peripheral.
var services = [
... // see PrimaryService for data type
];
bleno.setServices(services[, callback(error)]);
bleno.disconnect(); // Linux only
bleno.updateRssi([callback(error, rssi)]); // not available in OS X 10.9
var PrimaryService = bleno.PrimaryService;
var primaryService = new PrimaryService({
uuid: 'fffffffffffffffffffffffffffffff0', // or 'fff0' for 16-bit
characteristics: [
// see Characteristic for data type
]
});
var Characteristic = bleno.Characteristic;
var characteristic = new Characteristic({
uuid: 'fffffffffffffffffffffffffffffff1', // or 'fff1' for 16-bit
properties: [ ... ], // can be a combination of 'read', 'write', 'writeWithoutResponse', 'notify', 'indicate'
secure: [ ... ], // enable security for properties, can be a combination of 'read', 'write', 'writeWithoutResponse', 'notify', 'indicate'
value: null, // optional static value, must be of type Buffer - for read only characteristics
descriptors: [
// see Descriptor for data type
],
onReadRequest: null, // optional read request handler, function(offset, callback) { ... }
onWriteRequest: null, // optional write request handler, function(data, offset, withoutResponse, callback) { ...}
onSubscribe: null, // optional notify/indicate subscribe handler, function(maxValueSize, updateValueCallback) { ...}
onUnsubscribe: null, // optional notify/indicate unsubscribe handler, function() { ...}
onNotify: null, // optional notify sent handler, function() { ...}
onIndicate: null // optional indicate confirmation received handler, function() { ...}
});
Can specify read request handler via constructor options or by extending Characteristic and overriding onReadRequest.
Parameters to handler are
offset
(0x0000 - 0xffff)callback
callback
must be called with result and data (of type Buffer
) - can be async.
var result = Characteristic.RESULT_SUCCESS;
var data = Buffer.alloc( ... );
callback(result, data);
Can specify write request handler via constructor options or by extending Characteristic and overriding onWriteRequest.
Parameters to handler are
data
(Buffer)offset
(0x0000 - 0xffff)withoutResponse
(true | false)callback
.callback
must be called with result code - can be async.
var result = Characteristic.RESULT_SUCCESS;
callback(result);
Can specify notify subscribe handler via constructor options or by extending Characteristic and overriding onSubscribe.
Parameters to handler are
maxValueSize
(maximum data size)updateValueCallback
(callback to call when value has changed)Can specify notify unsubscribe handler via constructor options or by extending Characteristic and overriding onUnsubscribe.
Call the updateValueCallback
callback (see Notify subscribe), with an argument of type Buffer
Can specify notify sent handler via constructor options or by extending Characteristic and overriding onNotify.
var Descriptor = bleno.Descriptor;
var descriptor = new Descriptor({
uuid: '2901',
value: 'value' // static value, must be of type Buffer or string if set
});
state = <"unknown" | "resetting" | "unsupported" | "unauthorized" | "poweredOff" | "poweredOn">
bleno.on('stateChange', callback(state));
bleno.on('advertisingStart', callback(error));
bleno.on('advertisingStartError', callback(error));
bleno.on('advertisingStop', callback);
bleno.on('servicesSet', callback(error));
bleno.on('servicesSetError', callback(error));
bleno.on('accept', callback(clientAddress)); // not available on OS X 10.9
bleno.on('disconnect', callback(clientAddress)); // Linux only
bleno.on('rssiUpdate', callback(rssi)); // not available on OS X 10.9
Note: Make sure you've also checked the Linux Prerequisites
Run the following command:
sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)
This grants the node
binary cap_net_raw
privileges, so it can start/stop BLE advertising.
Note: The above command requires setcap
to be installed, it can be installed using the following:
sudo apt-get install libcap2-bin
su -c \'yum install libcap2-bin\'
hci0
is used by default to override set the BLENO_HCI_DEVICE_ID
environment variable to the interface number.
Example, specify hci1
:
sudo BLENO_HCI_DEVICE_ID=1 node <your file>.js
By default bleno uses the hostname (require('os').hostname()
) as the value for the device name (0x2a00) characterisic, to match the behaviour of OS X.
A custom device name can be specified by setting the BLENO_DEVICE_NAME
environment variable:
sudo BLENO_DEVICE_NAME="custom device name" node <your file>.js
or
process.env['BLENO_DEVICE_NAME'] = 'custom device name';
bleno uses a 100 ms advertising interval by default.
A custom advertising interval can be specified by setting the BLENO_ADVERTISING_INTERVAL
environment variable with the desired value in milliseconds:
sudo BLENO_ADVERTISING_INTERVAL=500 node <your file>.js
Advertising intervals must be between 20 ms to 10 s (10,000 ms).
gatttool
by BlueZ for LinuxCopyright (C) 2015 Sandeep Mistry sandeep.mistry@gmail.com
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.