PS/2 to Serial Mouse Adapter
Many retro PCs were used with serial port mouse and don't have any PS/2 ports. Unfortunately most of the serial mice are broken or expensive today. Furthermore they were mechanical devices with a heavy steel ball to track the movement. This mechanics got dirty quite fast and was not the best user experience anyway. A better solution are optical PS/2 mice, most of which unfortunately would not work on a serial port. This adapter can be used to connect such a PS/2 mouse to a serial port of a retro PC.The Adapter is made from through-hole parts only, so it is very easy to solder and due to Arduino based solution, it is also a very nice device for tinkering, experimenting and learning about mouse protocols.
How does it work?
The serial port on the computer communicates with the mouse using basically two pins - RTS and RX. RTS is used for notification and RX for the actual data transfer, which contains mouse position, buttons state etcetera. A standard PS/2 mouse on the other hand uses completely incompatible protocol and transfers the data between the mouse and the computer using the Data and Clock pins. If we want to connect a PS/2 mouse, to a serial port, we need some instance in between, to translate between the two different protocols. In this adapter the translation is done using an Arduino Mini. However, there is another problem. PS/2 mouse protocol uses so called TTL logic, which simply means, that the voltage of 0V means a logical zero and 5V means a logical one. TTL logic is what Arduino uses as well, but a serial port, or also called RS232, uses another voltage levels. Any voltage below -3V is a logical one and a voltage above +3V is a logical zero. So, it is not possible to connect Arduino output directly to the serial port. It simply will not work and needs another translator, which converts TTL voltage level to RS232 levels. In this adapter such conversion is made by a well known MAX232 IC. The software is written in C/C++, it is a simple Arduino project, which can be used in Arduino Studio as usual.
How to use?
This project contains everything you need to build your own adapter. You can use the gerber files to order a PCB. The list of materials is below. After soldering the adapter, connect the Arduino Mini using an USB to TTL adapter to your PC and flash the firmware using the Arduino IDE. If you don't know how to do that, please refer to the documentation of Arduino.
ATTENTION! The USB port (PWR1) on the adapter is only for powering the circuits, it is not a data port!
Connecting the adapter to the PC is very simple. Plug your PS/2 Mouse into the adapter, connect a mini USB cable to power the adapter. Plug the adapter into a serial port of your PC. Turn on the PC and use a serial mouse driver of your choice. The adapter was tested with Microsoft, Logitech and Cute mouse drivers. Cute Mouse Driver is part of FreeDos project and is free and open source.
Jumper Settings
There are two jumpers, which can be used to set different modes. Currently you can choose between 2- and 3-button mouse modes and select so called remote and streaming mode. Remote mode sends mouse data all the time and has a better response times in current implementation. Streaming mode sends only data, when mouse position or button state changes. Unfortunately, this mode is currently not in a good shape. It has a higher delay and can result in some timing issues. However, it is interesting to have it for experimental purpose. Default values are when the jumpers are unset.
| JP1 | Setting | Description |
|---|---|---|
| 1-2 | unset | 3-button Logitech mouse |
| 1-2 | set | 2-button Microsoft mouse |
| 3-4 | unset | remote mode |
| 3-4 | set | streaming mode (experimental) |
Bill of materials
| Reference | # | LCSC | Description |
|---|---|---|---|
| U1 | 1 | Arduino Pro Mini 5V (ATMega168 or better) | |
| U2 | 1 | C911187 | MAX232 or compatible DIP16 package |
| RS232 | 1 | C141882 | DB9 female RS232 port |
| MOUSE1 | 1 | C77848 | PS/2 female port |
| PWR1 | 1 | C46398 | Mini-USB port for power supply |
| C1-5 | 5 | C106448 | 1µF electrolytic capacitor |
| R1 | 1 | C57436 | 10kOhm resistor (pull-up) |
| JP1 | 1 | 2x2 jumper header (optional) |
Known issues
The code is still in development. It works, but it still has some flaws. Timing is really important in this project and sometimes mouse drivers seem not to get a response in time from the adapter. Usually just executing the driver once again will initialize the mouse.
Tested Mice
If you test the adapter with a mouse, which is not in this list please consider to submit a report to improve the compatibility of the adapter.
- Logitech Optical Mouse M-BT58 (USB, PS/2, Optical)
- NagerIT Fair Mouse (USB, PS/2, Optical)
- Typthoon Optical Mouse (USB, PS/2, Optical)
- Microsoft IntelliMouse Optical (USB, PS/2, Optical)
- Microsoft IntelliMouse "Classic" (PS/2, Balled)
- Microsoft Basic Optical Mouse (USB, PS/2, Optical, produced 2021)
- Microsoft Comfort Optical Mouse 300 (USB, PS/2, Optical)
- IBM 33G5430 (PS/2, Mechanical)
Links
- PS/2 Mouse Protocol description
- More PS/2 Mouse Protocol description
- Serial Mouse Protocol description
- Cute Mouse Driver
Special Thanks
- creopard from dosreloaded.de for testing with MS IntelliMouse Optical
- moravec from dosreloaded.de for donating the original IBM 33G5430 mechanical mouse