symless/synergy-android-cyanogen

APK download: http://sourceforge.net/projects/synergyandroid/files/

Introduction

SynergyAndroid is a port of the synergy client to the Android platform. See http://synergy-project.org for detail. Currently in the planning stage. New developers are very welcome to join in.

Pre-requirements

We use the uinput module for user space input driver, so you must have a modded Android with access to /dev/uinput (Like Cyanogen). That means your android must have /dev/uinput module and this file can be RW by app.

You can follow blow steps to set a custom android emulator for testing:

1. Clone the android kernel source from android.git.kernel.org
    #git clone git://android.git.kernel.org/kernel/common.git
2. Check out the emulator branch
    #git checkout -t origin/android-goldfish-2.6.29 -b goldfish
3. Generate the kernel configuration for emulator
    #make ARCH=arm goldfish_defconfig
or get a config copy from a exist emulator rom.
    #adb pull /proc/config.gz
4. Edit the .config file, make sure 
    CONFIG_INPUT_UINPUT=y
5. Compile the kernel using cross toolchain (you can get prebuilt 
   cross toolchain from android source repo or just
    #git clone git://android.git.kernel.org/platform/prebuilt.git
   all platform cross chain are there.)
    #make ARCH=arm CROSS_COMPILE=prebuilt/YOUR_PLATFORM/toolchain/arm-eabi-4.2.1/bin/arm-eabi-

6. Now, the kernel built is in the arch/arm/boot/ folder. 
   You can start the emulator with this kernel
    #emulator -avd YOUR_AVD -kernel ANDROID_KERNEL_PATH/arch/arm/boot/zImage 

7. At last, you should make sure your app can read and write /dev/uinput
    #adb shell chmod 660 /dev/uinput

8. Now, you can build the project and test it.

Building the project

SynergyAndroid use the jni to access the /dev/uinput module, so you must compile the jni source by NDK firstly. And then you can directly build and debug the project in eclipse.

#./build_jni.sh <NDK Base>

then just build the whole project in eclipse.

Running

Reminder: you should build the jni source first and chmod 666 /dev/uinput

Then you can:

just run the project in eclipse or
install the PROJECT_PATH/bin/Synergy.apk to emulator/device.
adb install PROJECT_PATH/bin/Synergy.apk