GBM Performance

Performance of the top/most widely used open source gradient boosting machines (GBM)/ boosted trees (GBDT) implementations (h2o, xgboost, lightgbm, catboost) on the airline dataset (100K, 1M and 10M records) and with 100 trees, depth 10, learning rate 0.1.

Popularity of GBM implementations

Poll conducted via twitter (April, 2019):

More recent twitter poll (September, 2020):

June 2024:

How to run/reproduce the benchmark

Installing to latest software versions and running/timing is easy and fully automated with docker:

CPU

(requires docker)

git clone https://github.com/szilard/GBM-perf.git
cd GBM-perf/cpu
sudo docker build --build-arg CACHE_DATE=$(date +%Y-%m-%d) -t gbmperf_cpu .
sudo docker run --rm gbmperf_cpu

GPU

(requires docker, NVIDIA drivers and the nvidia-docker utility)

git clone https://github.com/szilard/GBM-perf.git
cd GBM-perf/gpu
sudo docker build --build-arg CACHE_DATE=$(date +%Y-%m-%d) -t gbmperf_gpu .
sudo nvidia-docker run --rm gbmperf_gpu

Results

CPU

r4.8xlarge (32 cores, but run on physical cores only/no hyperthreading) with software as of 2024-06-04:

Results on newer hardware (m7i/c7i/r7i) here (TLDR: ~2x speedup on the newer hardware).

GPU

p3.2xlarge (1 GPU, NVIDIA V100) with software as of 2024-06-06 (and CUDA 12.5):

Results on newer hardware (A10/A100/H100) here (TLDR: more modest speedups compared to neural nets, ~1.3x for XGBoost on the largest data).

Additional results

Some additional studies obtained "manually" (not fully automated with docker as the main benchmark above). Thanks @Laurae2 for lots of help with some if these.

Faster CPUs

AWS has now better CPUs than r4.8xlarge (Xeon E5-2686 v4 2.30GHz, 32 cores), for example with higher CPU frequency c5.9xlarge (Xeon Platinum 8124M 3.00GHz, 36 cores) or more number of cores m5.12xlarge (Xeon Platinum 8175M 2.50GHz, 48 cores).

c5.9xlarge and m5.12xlarge are typically 20-50% faster than r4.8xlarge, for larger data more cores (m5.12xlarge) is the best, for smaller data high-frequency CPU (c5.9xlarge) is the best. Nevertheless, the ranking of libs by training time stays the same for a given data size when changing CPU. More details here.

Even more recently a CPU with both higher frequency and more cores became available on AWS: c5.12xlarge (Xeon Platinum 8275CL 3.00GHz, 48 cores) and also instances with 2 of these CPUs (but see results for multi-socket systems below): c5.24xlarge and c5.metal. Results for c5.metal are here.

2024 update: latest results for the newest CPUs (c7i.metal-48xl and c7a.metal-48xl) are here.

Multi-core scaling (CPU)

While GBM trees must be grown sequentially (as building each tree depends on the results of the previous ones), GBM training can be parallelized e.g. by parallelizing the computation in each split (more exactly the histogram calculations). Modern CPUs have many cores, but the scaling of these GBM implementations is far worse from being proportional to the number of cores. Furthermore, it has been known for long (2016) that xgboost (and later lightgbm) slow down (!) on systems with 2 or more CPU sockets or when hyperthreaded cores are used. These problems have been very recently mitigated (2020), but it is still usually best to restrict your training process to the physical cores (avoid hyperthreading) and only 1 CPU socket (if the server has 2 or more sockets).

Even if only physical (no hyperthreading) CPU cores are used on 1 socket only, the speedup for example from 1 core to 16 cores is not 16x, but (on r4.8xlarge):

with more details here. In fact the scaling was worse until very recently, for example xgboost was at 2.5x at 1M rows (vs 6.5x now) before several optimizations have been implemented in 2020.

2024 update: latest results for the newest CPUs (c7i.metal-48xl and c7a.metal-48xl) with multicore scaling up to 48 physical cores (no hyperthreading) and beyond (with hyperthreading) are here.

Multi-socket CPUs

Most high-end servers have nowadays more than 1 CPU on the motherboard. For example c5.18xlarge has 2 CPUs (2x of the c5.9xlarge CPUs mentioned above), same for r4.16xlarge or m5.24xlarge. There are even EC2 instances with 4 CPUs e.g. x1.32xlarge (128 cores) or more.

One would think more CPU cores means higher training speed, though because of RAM topology and NUMA, most of the above tools used to run slower on 2 CPUs than 1 CPU (!) until very recently (2020). The slowdown was sometimes pretty dramatic, e.g. 2x for lightgbm or 3-5x for xgboost even for the largest data in this benchmark. Very recently these effects have been mitigated by several optimizations in lightgbm and even more notably in xgboost. More details on the NUMA issue here, here and here.

Currently, the difference in training speed e.g. on r4.16xlarge (2 sockets, 16 cores + 16 HT each, so total of 64 cores) between 16 physical cores and 64 total cores is:

where negative numbers mean on 64 cores it is slower than on 16 cores (by that much %) (e.g. -50% means a decrease in speed by 50% that is a doubling of training time). These numbers were much much worse until very recently (2020), for example training time (sec) for xgboost 1M rows:

that is xgboost was 10x slower on 64 cores vs 16 cores and it was slower on 64 cores vs even 1 core (!). One can see that the recent optimizations have improved both the multicore scaling and the NUMA (multi-socket) issue.

2024 update: latest results for the newest CPUs (c7i.metal-48xl and c7a.metal-48xl) with 192 cores (with 2 CPU sockets) are here.

100M records and RAM usage

Results on the fastest CPU (most cores, 1 socket, see above why this is the fastest) and the fastest GPU on EC2. The data is obtained by replicating the 10M dataset 10x, so the AUC is not indicative of a learning curve, just used to see if it is equal approximately the 10M AUC (it should be).

For the CPU runs, "RAM train" is measured as the increase in memory usage during training (on top of the RAM used by the data). For the GPU runs, the "GPU memory" usage is the total GPU memory used (cannot separate training from copies of the data), while the "extra RAM" is the additional RAM used by some of the tools (on the CPU) if any.

CPU (m5.12xlarge):

GPU (Tesla V100):

catboost GPU crashes out-of-memory on the 16GB GPU.

h2o xgboost on GPU is slower than native xgboost on GPU and also adds a lot of overhead in RAM usage ("extra RAM") (this must be due to some pre- and post-processing of data in h2o as one can see by looking at the GPU utilization patterns as discussed next).

More details here.

2024 update: latest CPU results for the newest c7i.metal-48xl (using 48 physical cores on 1 socket, no hyperthreading, no NUMA/2 sockets):

The 2.7x speedup in CPU XGBoost (vs results above) are due to the significant improvement in multicore scaling (2020), further improvements in speed and also the increase in number of cores of the top CPUs. The 5.6x speedup in CPU LightGBM are due to implementation of direct handling of categorical variables and increase in number of cores of the top CPUs (LightGBM benefits more than XGBoost with many CPU cores for large datasets).

GPU utilization patterns

For the GPU runs, it is interesting to observe the GPU utilization patterns and also the CPU utilization meanwhile (usually 1 CPU thread).

xgboost uses GPU at ~80% and 1 CPU core at 100%.

h2o xgboost shows 3 phases: first only using CPU at ~30% (all cores) and no GPU, then GPU at ~70% and CPU at 100%, then no GPU and CPU at 100%. This means 3-4x longer training time vs native xgboost.

lightgbm uses GPU at 5-10% and meanwhile CPU at 100% (all cores). It can be made to use 1 CPU core only (nthread = 1), but then it may be slower.

catboost uses GPU at ~80% and 1 CPU core at 100%. Unlike the other tools catboost takes all the GPU memory available when it starts training no matter of the data size (so we don't know how much memory it needs by using the standard monitoring tools).

More details here.

Spark MLlib

In my previous broader benchmark of ML libraries, Spark MLlib GBT (and random forest as well) performed very poorly (10-100x running time vs top libs, 10-100x memory usage and an accuracy issue for larger data) and therefore it was not included in the current GBM/GBT benchmark. However, people might still be interested if there has been any improvements since 2016 and Spark 2.0.

With Spark 2.4.2 as of 2019-05-05 the accuracy issue for larger data has been fixed, but the speed and the memory footprint did not improve:

(compared to lighgbm CPU) (Spark code here)

So Spark MLlib GBT is still 100x slower than the top tools. In case you are wondering if more nodes or bigger data would help, the answer in nope (see below).

Spark MLlib on 100M records and RAM usage

Besides being slow, Spark also uses 100x RAM compared to the top tools. In fact, on 100M records (20GB after being loaded from disk and cached in RAM) it crashes out-of-memory even on servers with almost 1 TB RAM.

(100M ran on x1e.8xlarge [32 cores, 960GB RAM], 10M ran on r4.8xlarge [32 cores, 240GB RAM])

(compare this with 100M records 100 trees depth 10, lightgbm 5GB RAM usage)

More details here.

Note the situation is much better for linear models in Spark MLlib, only 3-4x slower and 10x more memory footprint vs h2o for example, see results here (and training linear models is much much faster than trees, so training times are reasonable even for large data).

Spark on a cluster

Results on a EMR cluster with master+10 slave nodes and comparison with local mode on 1 server (and "cluster" with 1 master+1 slave). To run in reasonable time only 10 trees (depth 10) have been used.

100M records data is "big" enough for Spark to be in the "at scale" modus operandi. However, the computation speed and memory footprint inefficiencies of the algorithm/implementation are so huge that no cluster of any size can really help. Furthermore larger data (billions) would mean even more prohibitively slow training (many hours/days) for any reasonable cluster size (remember, the timings above are for 10 trees, any decent GBM would need at least 100 trees).

Also, the fact that Spark has so huge memory footprint means that one can run e.g. lightgbm instead on much less RAM, so that even larger datasets would fit in the RAM of a single server. Results for lightgbm for comparison with the above Spark cluster results (10 trees):

More details here.

Recommendations

If you don't have a GPU, lightgbm and xgboost (CPU) train the fastest.

If you have a GPU, xgboost (GPU) is very fast (and depending on the data, your hardware etc. often faster than the above mentioned lightgbm/xgboost on CPU).

If you consider deployment, h2o has the best ways to deploy as a real-time (fast scoring) application.

Note, however, there are a lot more other criteria to consider when you choose which tool to use, e.g.:

You can find more info in my talks at several conferences and meetups with many of them having video recordings available, for example my talk at Berlin Buzzwords in 2019, video recording here, slides here, or a more updated talk from November 2020 at the LA Data Science Meetup, video recording here, slides here.

2024 updates in a university seminar talk, slides here.