Closed burden42 closed 1 month ago
I had the same problem as you for months, but this week I got a firmware update to the gateway and it seems to be solved.
Please install the firmware update proposed by the “ONECTA - Daikin” App. The new version is 436CC180000.
Is there a way to get the firmware manually?
On Mon, 29 Apr 2024, 09:00 lufetico, @.***> wrote:
I had the same problem as you for months, but this week I got a firmware update to the gateway and it seems to be solved.
Please install the firmware update proposed by the “ONECTA - Daikin” App. The new version is 436CC180000.
— Reply to this email directly, view it on GitHub https://github.com/tadasdanielius/daikin_altherma/issues/92#issuecomment-2082100607, or unsubscribe https://github.com/notifications/unsubscribe-auth/BE74EDKZ42WHV73PAJTWEFLY7X4YDAVCNFSM6AAAAABGQNSA3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBSGEYDANRQG4 . You are receiving this because you authored the thread.Message ID: @.***>
It is probably possible, but I don't know how to do it. Maybe in a Daikin developer forum they can help you.
I spoke too soon. Today the integration started to fail again. :(
Interesting my daikin updated to day the controller
Not yet tried the lan gateway. This was via the WiFi adapter
On Mon, 29 Apr 2024, 20:33 lufetico, @.***> wrote:
I spoke too soon. Today the integration started to fail again. :(
— Reply to this email directly, view it on GitHub https://github.com/tadasdanielius/daikin_altherma/issues/92#issuecomment-2083511277, or unsubscribe https://github.com/notifications/unsubscribe-auth/BE74EDPDI2TDCDHMRVMAADDY72N7BAVCNFSM6AAAAABGQNSA3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBTGUYTCMRXG4 . You are receiving this because you authored the thread.Message ID: @.***>
Contracted Daikin . They advised have another attempt at connecting the adaptor. This time it did 2 firmware updates , and after another power cycle . I now have connections into home assistant Daikin adapter on version 436CC180000.
Apparently firmware is not available to download and install manually
See above
have installed a daikin brp069a62 on to a daikin altherma monblock system with a room thermostat
unit comes on line and is seen by home assistant
but only the Hot water cylinder is seen and all the sensors are off line
know issue ?
is it a firmware update required on the daikin brp069a62 if so can not see any firmware on the daikin website
thankyou