This HA integration is for BRP069A62 (should work with BRP069A61) Daikin Altherma LAN adapter. Also, it has been successfully tested with D2CND with gateway DRGATEWAYAA.
The integration connects to device locally, thus internet connection is not required.
NOTE: This is a very early release, and comes without any guarantees. So, use it at your own risk.
You can install manually or by using HACS (the easier way).
HACS > Integrations
+ explore and & download repositories
Daikin Altherma
configuration.yaml
).custom_components
directory (folder) there, you need to create it.custom_components
directory (folder) create a new folder called daikin_altherma
.custom_components/daikin_altherma/
directory (folder) in this repository.If device is not discovered automatically you can go to "Configuration" -> "Integrations" click "+" and search for "Daikin Altherma HVAC"
This integration allows to control the following options
For water heating:
For space heating:
I do not own room thermostat, therefore I cannot properly test it. In this case I just control leaving water temperature. Daikin device allows to control leaving water temperature which is not what you expect your room temperature to be it is either higher or lower (if cooling is turned on). If you don't have thermostat you can use generic thermostat which comes with HA by default.
Put this into your configuration.yaml
:
climate:
- platform: generic_thermostat
name: My Heater
unique_id: daikin_climate_control
target_sensor: sensor.indoor_temperature
min_temp: 18
max_temp: 26
heater: switch.climate_control
target_temp: 20
cold_tolerance: 0.3
hot_tolerance: 0.3
ac_mode: false
initial_hvac_mode: "heat"
min_cycle_duration:
seconds: 5
target_sensor
can be any temperature sensor.