This is the benchmark tool for MQTT Broker implemented by golang. This can benchmark the throughput for publishing and subscribing.
Supported benchmark pattern is:
Use go get
and go install
$ go get github.com/takanorig/mqtt-bench
$ go install github.com/takanorig/mqtt-bench
or
Download here
https://github.com/takanorig/mqtt-bench/releases
$ mqtt-bench -broker=tcp://192.168.1.100:1883 -action=pub
2015-04-04 12:47:38.690896 +0900 JST Start benchmark
2015-04-04 12:47:38.765896 +0900 JST End benchmark
Result : broker=tcp://192.168.1.100:1883, clients=10, totalCount=1000, duration=72ms, throughput=13888.89messages/sec
### Subscribe
* Precondition
* The MQTT Broker is started.
* Publishing to MQTT Broker.
(Publish the messages while subscribing) $ mqtt-bench -broker=tcp://192.168.1.100:1883 -action=pub -count=10000
$ mqtt-bench -broker=tcp://192.168.1.100:1883 -action=sub 2015-04-04 12:50:27.188396 +0900 JST Start benchmark 2015-04-04 12:50:27.477896 +0900 JST End benchmark
Result : broker=tcp://192.168.1.100:1883, clients=10, totalCount=1000, duration=287ms, throughput=3484.32messages/sec
If the following message is output to the console, the count is over limit.
So, please set ```-intervalTime``` option.
panic: Subscribe error : Not finished in the max count. It may not be received the message.
### TLS mode
Use ```-tls``` option.
- Server authentication
-tls=server:certFile
- Server and Client authentication
-tls=client:rootCAFile,clientCertFile,clientKeyFile
## Usage
Usage of mqtt-bench -action="p|pub or s|sub" : Publish or Subscribe (required) -broker="tcp://{host}:{port}" : URI of MQTT broker (required) -broker-password="" : Password for connecting to the MQTT broker -broker-username="" : Username for connecting to the MQTT broker -tls="" : TLS mode. 'server:certFile' or 'client:rootCAFile,clientCertFile,clientKeyFile' -qos=0 : MQTT QoS(0|1|2) -retain=false : MQTT Retain -topic="/mqtt-bench/benchmark" : Base topic -clients=10 : Number of clients -count=100 : Number of loops per client -size=1024 : Message size per publish (byte) -pretime=3000 : Pre wait time (ms) -intervaltime=0 : Interval time per message (ms) -x=false : Debug mode
## Note
* Using Apollo
* If you use [Apollo 1.7.x](http://activemq.apache.org/apollo/), the subscribed messages can't be output to console even if debug mode. If you want to output the subscribed messages, designate ```-support-unknown-received``` option.