Synology personnal hack, info, tools & source code
Donnations welcomed at: 0x522d164549E68681dfaC850A2cabdb95686C1fEC
The following allows building kernel modules for the Hauppauge WinTV DualHD HWC 955D media adapter allowing to use TVheadEnd (TVH) natively within the NAS.
In theory this procedure is also valid to build most supported DVB adaptors available from the Media Tree within the Linux Media Subsystem.
Tested on the following hardware:
Finding your running kernel:
$ uname -mvr
4.4.59+ #24922 SMP PREEMPT Thu Mar 28 11:07:03 CST 2019 x86_64Finding your CPU type:
$ cat /proc/cpuinfo | grep model.name | head -1
model name : Intel(R) Celeron(R) CPU J3455 @ 1.50GHzI had backported patches to the Synology DSM 6.x 4.4.59+ kernel but there where a few pending issues. Since then b-rad-NDi ended-up providing a backporting tool that allows rebuilding the media tree over the Synology DSM kernel. This solution as been playing really nicely on my NAS over the last months. Big thanks to b-rad-NDi!!!
For more details on b-rad-NDi project refer to:
Working:
em28xx: both tuners detected & firmware loading OKlgdt3306a: fully functionalEnd result:
tvheadend: fully detects both tunersInstead of building your own I've made available a pre-built module package for Hauppauge 955D USB DVB dongle to work on Synology NAS 6.2.2 kernel 4.4.59+ with Apollolake CPU (e.g. DS918+):
Using a Ubuntu 18.04 OS to build the updated modules install a few essential packages:
$ sudo apt update
$ sudo apt install build-essential ncurses-dev bc libssl-dev libc6-i386 curl libproc-processtable-perlClone b-rad-NDi git repository:
$ git clone https://github.com/b-rad-NDi/Embedded-MediaDrivers.git
$ cd Embedded-MediaDrivers
~/Embedded-MediaDrivers$Create a SYNO-Apollolake download directory:
$ mkdir dl/SYNO-ApollolakeDownload the toolchain
$ wget --content-disposition https://sourceforge.net/projects/dsgpl/files/DSM%206.2%20Tool%20Chains/Intel%20x86%20Linux%204.4.59%20%28Apollolake%29/apollolake-gcc493_glibc220_linaro_x86_64-GPL.txz/download -P dl/SYNO-Apollolake/Download the Synology DSM kernel sources:
$ wget --content-disposition https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/22259branch/apollolake-source/linux-4.4.x.txz/download -P dl/SYNO-Apollolake/Initialize the repository:
$ ./md_builder.sh -i -d SYNO-ApollolakeBuild a default Synology DSM kernel build (takes a while):
$ export MAKEOPTS="-j`nproc`"
$ ./md_builder.sh -B media -d SYNO-ApollolakeConfigure the media tree, get the latest media tree patches that applies over the default Synology DSM kernel and build the media drivers:
$ ./md_builder.sh -g -d SYNO-Apollolake
$ cd build/SYNOAPOLLOLAKE/media_build
build/SYNOAPOLLOLAKE/media_build$ ./buildUsing SSH login as admin on the synology NAS:
$ ssh admin@<my.syno.nas.ip>Create a new local module directory (name will match kernel version):
$ sudo mkdir -p /usr/local/lib/modules/$(uname -r)
$ cd /usr/local/lib/modules/$(uname -r)Download the updated media drivers modules over to the NAS (the following downloads not only the mandatory modules for Hauppauge WinTV but rather all the media tree modules):
$ cd /usr/local/lib/modules/$(uname -r)
$ sudo scp "username@<my.ubuntu.linux.ip>:~/Embedded-MediaDrivers/build/SYNOAPOLLOLAKE/media_build/v4l/*.ko" .Copy the start/stop/load/reset script to the NAS (and make it executable):
$ cd /usr/local/lib/modules/$(uname -r)
$ wget https://raw.githubusercontent.com/th0ma7/synology/master/hauppauge.sh
$ chmod 755 hauppauge.shCreate a symbolic link to /opt/bin/hauppauge.sh for ease of use:
$ sudo ln -s -T -f /usr/local/lib/modules/$(uname -r)/hauppauge.sh /opt/bin/hauppauge.shCreate a local rc file locate at /usr/local/etc/rc.d/media.sh that will be executed at boot time:
$ cat << EOF | sudo tee /usr/local/etc/rc.d/media.sh
#!/bin/sh
/usr/local/lib/modules/$(uname -r)/hauppauge.sh load
EOF
$ sudo chmod 755 /usr/local/etc/rc.d/media.shExecute manually the rc script to confirm there is no error:
$ sudo /usr/local/etc/rc.d/media.shValidate the status:
$ sudo /opt/bin/hauppauge.sh status
Status pkgctl-tvheadend... N/A
kernel module status...
em28xx_dvb OK
em28xx OK
lgdt3306a OK
si2157 OK
tveeprom OK
v4l2_common OK
dvb_usb OK
rc_core OK
dvb_core OK
videobuf2_vmalloc OK
videobuf2_memops OK
videobuf2_v4l2 OK
videobuf2_common OK
videodev OK
media OK
kernel USB (1-3) autosuspend values...
(1-3)autosuspend_delay_ms [-1000] -> OK
(1-3)autosuspend [ -1] -> OK
kernel sysctl values...
vm.dirty_expire_centisecs [ 300] -> OK
vm.swappiness [ 1] -> OKNormally should see something similar in kernel dmesg:
[ 557.806644] em28xx: New device HCW 955D @ 480 Mbps (2040:026d, interface 0, class 0)
[ 557.815308] em28xx: DVB interface 0 found: isoc
[ 557.820423] em28xx: chip ID is em28174
[ 558.939915] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x3d790eca
[ 558.947531] em28174 #0: EEPROM info:
[ 558.951857] em28174 #0: microcode start address = 0x0004, boot configuration = 0x01
[ 558.966683] em28174 #0: AC97 audio (5 sample rates)
[ 558.972234] em28174 #0: 500mA max power
[ 558.976620] em28174 #0: Table at offset 0x27, strings=0x0a72, 0x187c, 0x086a
[ 558.984753] em28174 #0: Identified as Hauppauge WinTV-dualHD 01595 ATSC/QAM (card=100)
[ 558.994647] tveeprom 8-0050: Hauppauge model 204101, rev B2I6, serial# 11584195
[ 559.002824] tveeprom 8-0050: tuner model is SiLabs Si2157 (idx 186, type 4)
[ 559.010649] tveeprom 8-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 559.023133] tveeprom 8-0050: audio processor is None (idx 0)
[ 559.029491] tveeprom 8-0050: has no radio, has IR receiver, has no IR transmitter
[ 559.038167] em28174 #0: dvb set to isoc mode.
[ 559.043177] em28xx: chip ID is em28174
[ 560.162726] em28174 #1: EEPROM ID = 26 00 01 00, EEPROM hash = 0x3d790eca
[ 560.170323] em28174 #1: EEPROM info:
[ 560.174326] em28174 #1: microcode start address = 0x0004, boot configuration = 0x01
[ 560.189064] em28174 #1: AC97 audio (5 sample rates)
[ 560.194613] em28174 #1: 500mA max power
[ 560.199009] em28174 #1: Table at offset 0x27, strings=0x0a72, 0x187c, 0x086a
[ 560.207139] em28174 #1: Identified as Hauppauge WinTV-dualHD 01595 ATSC/QAM (card=100)
[ 560.216915] tveeprom 10-0050: Hauppauge model 204101, rev B2I6, serial# 11584195
[ 560.225192] tveeprom 10-0050: tuner model is SiLabs Si2157 (idx 186, type 4)
[ 560.233070] tveeprom 10-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 560.245327] tveeprom 10-0050: audio processor is None (idx 0)
[ 560.251757] tveeprom 10-0050: has no radio, has IR receiver, has no IR transmitter
[ 560.260220] em28xx: dvb ts2 set to isoc mode.
[ 560.465298] em28174 #0: Binding DVB extension
[ 560.476140] i2c i2c-8: Added multiplexed i2c bus 11
[ 560.501921] lgdt3306a 8-0059: LG Electronics LGDT3306A successfully identified
[ 560.509994] DEBUG: Passed lgdt3306a_probe 2360
[ 560.517015] si2157 11-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 560.525695] DVB: registering new adapter (em28174 #0)
[ 560.531352] usb 1-3: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)...
[ 560.544142] em28174 #0: DVB extension successfully initialized
[ 560.550672] em28174 #1: Binding DVB extension
[ 560.560027] i2c i2c-10: Added multiplexed i2c bus 12
[ 560.585962] lgdt3306a 10-000e: LG Electronics LGDT3306A successfully identified
[ 560.601410] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 560.610075] DVB: registering new adapter (em28174 #1)
[ 560.615721] usb 1-3: DVB: registering adapter 1 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)...
[ 560.627161] em28174 #1: DVB extension successfully initialized
[ 562.882976] si2157 12-0062: found a 'Silicon Labs Si2157-A30'
[ 562.939717] si2157 12-0062: firmware version: 3.0.5
[ 562.945214] usb 1-3: DVB: adapter 1 frontend 0 frequency 0 out of range (55000000..858000000)And the following USB devices with associated modules (ID may vary depending if connected using the front or back USB ports):
$ lsusb -Ic
|__usb1 1d6b:0002:0404 09 2.00 480MBit/s 0mA 1IF (Linux 4.4.59+ xhci-hcd xHCI Host Controller 0000:00:15.0)
1-0:1.0 (IF) 09:00:00 1EP () hub
|__1-1 2040:026d:0100 00 2.00 480MBit/s 500mA 1IF (HCW 955D 0011584195)
1-1:1.0 (IF) ff:00:00 2EPs () em28xx
|__1-4 f400:f400:0100 00 2.00 480MBit/s 200mA 1IF (Synology DiskStation 6500794064E41636)
1-4:1.0 (IF) 08:06:50 2EPs () usb-storage host5 (synoboot)
|__usb2 1d6b:0003:0404 09 3.00 5000MBit/s 0mA 1IF (Linux 4.4.59+ xhci-hcd xHCI Host Controller 0000:00:15.0)
2-0:1.0 (IF) 09:00:00 1EP () hubNow reboot the NAS using the admin web page and confirm after reboot that the dmesg output and lsusb are still ok.
In case you run into issue where your NAS refuses to fully shutdown (and thus reboot) with the power button led blinking, it is most probably due to tainted modules still in memory. Running hauppauge.sh stop prior to shutdown/reboot will remove all the tainted modules from memory thus allowing the NAS to properly shutdown/reboot.
This script is intended to provide a simple method to start|stop|restart the various perequesites into getting media modules loaded onto the Synology NAS.
Basicaly what the script does:
sysctl for optmizationspkgctl-tvheadend)The script uses insmod to load|unload the modules into the appropriate order. The MODULES parameter in the script can be adapted as needed for other DVB dongles than the Hauppauge WinTV 955D.
| Order | Module | rmmod |
|---|---|---|
| 1 | media.ko |
media |
| 2 | videodev.ko |
videodev |
| 3 | videobuf2-common.ko |
videobuf2_common |
| 4 | videobuf2-v4l2.ko |
videobuf2_v4l2 |
| 5 | videobuf2-memops.ko |
videobuf2_memops |
| 6 | videobuf2-vmalloc.ko |
videobuf2_vmalloc |
| 7 | dvb-core.ko |
dvb_core |
| 8 | rc-core.ko |
rc_core |
| 9 | dvb-usb.ko |
dvb_usb |
| 10 | v4l2-common.ko |
v4l2_common |
| 11 | tveeprom.ko |
tveeprom |
| 12 | si2157.ko |
si2157 |
| 13 | lgdt3306a.ko |
lgdt3306a |
| 14 | em28xx.ko |
em28xx |
| 15 | em28xx-dvb.ko |
em28xx_dvb |
start: Does a full start including:
sysctl adjustmentsstop: Does a stop which basicaly is:
restart: Basically performs a stop then start.
reset: This is usefull when hitting BUGS with TVH such as OOM killer where the tvheadend service is being killed by the system. The reset option reduces to the minimal the impact over the already loaded modules by resetting only the DVB frontend module such as:
em28xx_dvbem28xx-dvb.koload: This is the option to be used at NAS startup. It basically does all the same things as the start option without the TVH startup as it's being managed by the Synology DSM stack automatically.
status: This provides a view on all things namely modules loaded into memory, USB autosuspend, sysctl adjustments and TVH service status including it's PID.