DEVELOPMENT IS NOW CONTINIUNG AS: OGN-Flight-Logger_V2
Python APRS/OGN program to log flight times, durations and maximum heights achieved
This python program creates an SQlite db of flights from a given location and aircraft list (the later two parameters are to be be developed into a more generalised format).
At the moment this is very much 'in development'
To install OGN Flight Logger the following prerequisites are required
To run flogger first set up the parameters in settings.py then call 'flogger.py'. Flogger.py will run continuously (perhaps it should be a 'service'?) logging flights during day, ie between sunrise and sunset. After sunset it processes the days log to determine which log entries constitute actual flights and those which are ground movements etc. Once all the flights have been generated into the 'flights' table and the days flights dumped as a .csv file, flogger determines when the next sunrise time and sleeps until then, ie waits.
OGN-Flight-Logger must be called using: python flogger.py your_username your_passcode, where you_username and your_passcode can be created on http://http://www.george-smart.co.uk/wiki/APRS_Callpass If a valid username and passcode are not suppled it will exit immediately.
If installing on an arm based system this can be achieved by:
sudo apt-get install python-tz sqlite3
wget http://www.pakettiradio.net/downloads/libfap/1.5/libfap6_1.5_armhf.deb
sudo dpkg -i libfap*.deb
sudo apt-get install pythonX-dev where X is version of python being used
sudo apt-get install python-pip
sudo pip install pyephem
sudo pip install geopy
sudo pip install geocoder
I'm currently developing and testing on
Flogger is being updated to optionally record flight tracks and output these as .gpx files. This feature is controlled by a field in the settings.py file.