Arduino_Parser_Ublox_Neo_M8N

Simple C++ library to parse U-Blox Neo M8N strings. Software tested on Atmega32u4 (Arduino Yun/Micro/Leonardo)

----- Simple Arduino Parser for U-Blox Neo M8N (GPS/GLONASS receiver) -----

Some of the obtained info:

• altitude, latitude, altitude
• fix type
• satellites in view
• setellites in use
• pdop, hdop, vdop, dop Age
• date, time
• speed, course, knots
• speed_age, course_age, knots_age
• satellite: prn, elevation, azimuth, snr

No virtual Serial (SoftwareSerial) is required since I use Serial1 on the Atmega32u4

Parsed strings:

• GNGGA, GNGSA, GPGSV, GNRMC, GNVTG

----- The project includes also the txt file describing the right M8N configuration for multirotors -----

You can flash the txt configuration file on the M8N using U-Center