FlexProp is a simple GUI for creating applications on the Parallax Propeller 2 (or 1), using assembler, Spin, BASIC or C. It consists of a very plain front end IDE, the flexspin compiler, and Dave Hein's loadp2 program loader. The default configuration is for the Prop2, but I've also included David Betz's proploader.exe, which allows flexprop to work on Propeller 1 systems as well.
FlexProp is distributed under the MIT license; see the file License.txt for details.
#define, #ifdef, and #include@@@ (only needed for P1)# in a jumpThe original Spin (Spin1) language is supported, with some enhancements from Spin2:
case_fast to force case to produce a jump table(x < y) ? x : yx,y := y,x+/, +//, +<, +=<, +>, +=>\, <=>pub file and pri file to include functions from other languages (C, BASIC)If the file name ends in .spin2, then the standard Spin2 language is assumed, with some legacy features from Spin1 supported.
See doc/spin.md for more details.
flexspin supports a fairly complete version of BASIC, based on traditional Microsoft BASICs. Please see doc/basic.md for details. Notable features are:
try / catchflexspin supports a C dialect called FlexC, which is intended to be C99 compatible with some C++ extensions. It is not yet complete. Notable enhancements are:
&To install, download the flexprop.zip file from the releases. The latest release is always located at:
https://github.com/totalspectrum/flexprop/releases/latest
Create a directory called "flexprop" (or whatever you'd like) and unpack the .zip file into that directory. Make sure the directory you create is writable, so do not unpack into a system directory like "Program Files". Use your desktop or a folder directly under "C:" instead.
For Mac OS X, it's recommended to run the flexprop program from a command line (although it should work from the Finder as well, that just isn't tested as much). Pre-built binaries of the command line tools like flexspin and loadp2 are provided. You may get a Gatekeeper warning about the binaries; if so you'll have to tell Gatekeeper to run them anyway.
At the moment you'll have to build from source on Linux. Instructions are given below.
Here are complete steps for building from scratch on a generic Debian based platform such as Ubuntu. Note that the first few steps (setting up a directory for the source code) may be tweaked to suit your wishes. Also note that the steps involving texlive-latex-recommended and pandoc are only required for formatting the documentation; if you only want the binaries you may skip these.
sudo apt-get update
sudo apt-get install build-essential xxd
sudo apt-get install bison git tk8.6-dev
sudo apt-get install texlive-latex-recommended pandoc
cd $HOME
mkdir -p src
cd src
rm -rf flexprop
git clone --recursive https://github.com/totalspectrum/flexprop
cd flexprop
make install INSTALL=~/flexprop
cd ~/flexprop
./flexpropAt each step if you are prompted to accept the installation make sure to say yes (Y).
Once the build is finished, the final flexprop installation will be in $HOME/flexprop. You can change this to another directory by adding an INSTALL=<dir> in the make install step, e.g.
make install INSTALL=/opt/flexpropTo run, go to the flexprop installation directory and run ./flexprop.
After the first installation, you won't have to do the "sudo" steps any more (the first 4 steps).
See the above Ubuntu/Debian instructions for further details, but the basic steps are:
sudo dnf install @development-tools
sudo dnf install gcc-c++
sudo dnf install tk-devel
sudo dnf install texlive-latex
sudo dnf install pandoc vim-common
sudo dnf install libXScrnSaver-devel
cd $HOME
mkdir -p src
cd src
rm -rf flexprop
git clone --recursive https://github.com/totalspectrum/flexprop
cd flexprop
make install INSTALL=~/flexprop
cd ~/flexprop
./flexpropFor other Linux versions you'll have to install appropriate development tools. The lists above for Ubuntu and Fedora should give you a hint for what you'll need to install; unfortunately, package names are not standardized across distributions, so you may need to search on the Internet for appropriate replacements for your distro.
You'll need to install tcl-tk development packages. I use homebrew for this, and installed with:
brew install tcl-tkThen you can build with something like:
cd $HOME
mkdir -p src
cd src
git clone --recursive https://github.com/totalspectrum/flexprop
cd flexprop
make installThe latest version of XCode cannot compile the PropLoader tool needed for P1 development. This appears to be an XCode bug. If you only do P2 development that may not matter to you (you can just ignore the error). Otherwise, you may have to drop back to an older version of the SDK by removing (or moving aside) the MacOSX13.3.sdk and replacing the generic MacOSX.sdk link to one that points to the older MacOSX12.3.sdk.
I use msys to build on Windows. Similar compiler collections with gcc or clang should work as well. There is no Visual Studio project file, so it would be difficult to build with VS.
Run flexprop.exe (Windows) or flexprop (other systems). Use the File menu to open a Spin or BASIC file. You may open multiple files. The one that is currently selected will be treated as the top level project if you try to compile and/or run. The commands used for compiling or running are settable from the Commands > Configure Commands... menu item. Compiling and running on Prop2 is the main focus, but you can configure for virtually any situation where just one file is compiled. So for example it should be feasible to use this GUI for p2gcc with a bit of tweaking.
Also under the File menu is an option for viewing the listing file. This will only be useful after a program is compiled.
To change between P1 and P2 development use Configure Commands... and select the appropriate default.
Your changes to commands, library directories, and other configuration information is saved in a file called .flexprop.config in the directory where flexprop.exe is located.
Under the File menu is an option to set library directories. The compiler will automatically look through these directories for OBJ files (Spin) or #include files (C).
Under the File menu is an option for viewing the listing file, which shows the PASM and binary generated by flexspin from your high level language. This file may only be opened after the first compilation is done; if you try to open before doing any compile you may get an "Error: could not read" dialog box.
The main advantage of FlexProp over PNut (the "official" development tool for the Prop2) is that PNut supports only Spin 2, whereas FlexProp supports Spin 1, Spin 2, BASIC, and C. You can write ordinary Spin1 code, with Prop2 assembly code in the DAT section (instead of Prop1 assembly code). This makes porting code from P1 easier.
The code is compiled to P2 assembler by flexspin. This is somewhat different from the way Spin traditionally worked on the Prop1, where Spin code is typically compiled to bytecode and interpreted. (Note that flexspin does work for Prop1, and compiles to P1 assembler in that case.) There is now an experimental bytecode compiler, which you may select in the Commands > Configure Commands... menu (click on "P1 bytecode defaults").
Documentation for the various languages supported is in the doc folder of the unpacked flexprop. BASIC is the best documented. The Spin documentation assumes familiarity with the original (Propeller1) Spin manual, and outlines the differences in the language flexspin accepts. The C documentation is a placeholder for now and mostly covers the flexspin specific extensions to C.
The scripts used are in the src subdirectory, so you can customize them to your heart's content. The main flexprop.exe program is basically just the Tcl/Tk interpreter (from the standard Tk distribution) with a tiny startup script that reads src/gui.tcl.
If you find FlexProp useful, please contribute to support its development. Contributions of code, documentation, and other suggestions are welcome. Monetary donations are also very welcome. The generous donations of our supporters on Patreon have enabled us to provide signed binaries for Windows and Mac.
To support FlexProp on Patreon: https://patreon.com/totalspectrum To support FlexProp on Paypal: https://paypal.me/totalspectrum