reconcile-and-post

cli to reconcile and post versions as well as create them

usage

one time items (or when updating versions)

1. download the project from the link above
2. edit the config.py file with the correct values

easy path

1. browse to reconcile-and-post-master\src
2. click on the *.bat file for what you would like to do

command line usage

1. open the command line and change directories to the src folder within this project
   • cd c:\dev\reconcile-and-post\src
2. activate the arcgis python conda environment to get access to arcpy
   • "C:\Program Files\ArcGIS\Pro\bin\Python\Scripts\proenv.bat"
   • or activate arcgispro-py3

You are now ready to run the tool. The tool is organized as a python module so to run the module you have to pass a special flag to python. python -m

You can use the tool in a few different ways by passing the action flag. The first action is create. This creates the version tree. delete does the opposite and deletes all the versions. reconcile creates the RNP versions and reconciles them. Finally, there is an all action which is the default and will perform all the other actions.

1. run the tool as a module to perform all of the actions.

   • python -m rnp or more specifically python -m rnp --action=all

     This assumes that there is already a version tree available.

2. run the tool to create the versions

   • python -m rnp --action=create

3. run the tool to delete the versions

   • python -m rnp --action=delete

4. run the tool to reconcile the versions

   • python -m rnp --action=reconcile

troubleshooting

if your terminal starts in another drive letter than where you downloaded type the drive letter only to switch. for example c:

if you see No module named rnp then you need to cd to the src folder within the project you downloaded. For example cd c:\dev\reconcile-and-post\src.