Homebridge plugin for Open Z-Wave devices. The main goal of this project is to map Z-Wave protocol command classes to HomeKit Accessories, Services, and Characteristics. Theoretically, it should make it support any Open Z-Wave device.
Work In Progress (the list shows command classes for the devices I currently have)
npm i -g homebridge-platform-zwave
Add the minimal platform configuration. This plugin creates Add Node
, Add Secure Node
, and Remove Node
buttons for your controller. All the supported command classes from all devices paired with your gateway appear in the Home app.
{
"platform": "zWavePlatform",
"name": "Z-Wave Platform",
"zwave": {
"devicePath": "/dev/cu.usbmodem144101"
}
}
ls /dev/cu.*
and/or ls /dev/tty.*
If you want to customize exposed accessories, add accessories
to your config. Ex.:
{
"platform": "zWavePlatform",
"name": "Z-Wave Platform",
"zwave": {
"devicePath": "/dev/cu.usbmodem144101"
},
"accessories": {
"3": {
"name": "My Switch",
"ignoreClasses": [ 38 ],
"values": {
"112-1-35": 37
}
}
}
}
valueId: value
to set the initial value.parameterId: value
to set the initial value.valueId: valueMaps
to map a value from Z-Wave to HomeKit.You can also set the node config to false
to ignore the node (device) entirely.
All the devices and command classes will be tested and added to this plugin as soon as I can get the device in my hands or with your help. Donations and PRs are welcome!
© velocityzen