Development MacPorts with arm-linux-gnueabi-gcc

These is my development repository for my local MacPorts. Feel free to use my local ports, but remember that these are unofficial.

Build Instructions for using local MacPorts

To use my local MacPorts, you will have to set it up as a local portfile repository as follows:

$ sudo port selfupdate 
$ sudo port upgrade outdated` 
$ git clone https://github.com/vibhothiiaanand/MacPorts.git
$ sudo vim /opt/local/etc/macports/sources.conf

Add a new line to the file before the line with the [default] tag

file:///path/to/MacPorts/ports [nosync]

where /path/to/MacPorts is the path to the MacPorts repository clone.

$ portindex

run it in the MacPorts/ports subdirectory to add the ports from my local MacPorts repository to the list of available ports

Using Precompiled version of the toolchain

To use the precompiled version of the arm-unknown-linux-gnueabihf it is very easy, you would require to do some simple steps to get it done

$ cd arm-unknown-linux-gnueabihf
$ cat * > arm-unknown-linux-gnueabihf.tar.gz
$ tar -xvzf arm-unknown-linux-gnueabihf.tar.gz

You would require to add \bin folder to PATHs

If you are using fish shell: set -U fish_user_paths /path/to/bin/folder $fish_user_paths

If you are using bash shell: PATH=$PATH:/path/to/bin/folder/