WARNING This component isn't maintained anymore. A new component is under development to improve the tahoma integration: https://github.com/iMicknl/ha-tahoma
Extend the home assistant tahoma integration with new features not yet published to HA.
Add the following to your configuration.yaml
:
tahoma_extended:
username: 'tahoma login'
password: 'tahoma password'
Currently this extension adds support for the following elements:
opendoors:OpenDoorsSmartLockComponent
)io:AtlanticElectricalHeaterIOComponent
)somfythermostat:SomfyThermostatThermostatComponent
, somfythermostat:SomfyThermostatTemperatureSensor
, somfythermostat:SomfyThermostatHumiditySensor
). rts:LightRTSComponent
).Climate integration is a bit of hack. To use it, you need a controller such as the Atlantic IO controller or the Smart
Thermostat, and a temperature sensor. The temperature sensor can be any sensor added to HA.
Add the following to your configuration.yaml
:
climate:
platform: tahoma_extended
sensors:
- name: Name of the climate device in the Tahoma Box
entity_id: sensor.associated_temperature_sensor
The name of the device MUST be the same as in the Tahoma Box. For instance, if your Atlantic IO Controller is called "Radiateur Parents" in the Tahoma Box,
and your temperature sensor is sensor.netatmo_parents_temperature
, then the corresponding
configuration section is:
climate:
platform: tahoma_extended
sensors:
- name: "Radiateur Parents"
entity_id: sensor.netatmo_parents_temperature
To contribute, run the following python script and PM me on the Home Assistant Community forum with the output written in devices.txt
and details on the device you want to be added.
import sys
try:
import pyhoma
except ModuleNotFoundError:
import subprocess
subprocess.check_call([sys.executable, "-m", "pip", "install", "pyhoma"])
import pyhoma
print("Input login: ")
userName=input()
print("Input password: ")
userPassword=input()
orig_stdout = sys.stdout
f = open('devices.txt', 'w')
sys.stdout = f
import pyhoma
api=pyhoma.PyHoma(userName=userName, userPassword=userPassword)
api.login()
api.get_setup()
devices = api.get_devices()
from pprint import pprint
for k,v in devices.items():
print("****************************************")
print("Label: " + v.label)
print("controlableName: " + v.type)
print("uiClass: " + v.uiclass)
print("widget: " + v.widget)
print("=== States ===")
states = v._Device__states_def
for s in states:
pprint(s, indent=4, width=20)
print(" ")
print("=== Commands ===")
commands = v._Device__command_def
for c in commands:
pprint(c, indent=4, width=20)
print(" ")
sys.stdout = orig_stdout
f.close()