This repo is dedicated to the bluetooth protocol used by the VictronConnect app and devices of Victron Energy. Currently there is some support for the following 3 devices:
The protocol is partially understood, the repo contains
victron.pyAll scripts are alpha quality, expert knowledge is needed. Documentation might be misleading / outdated!
running this script can potentially destroy your device or battery/solar panel setup
You have been warned!
copy or symlink victron.lua into the wireshark user plugin folder, see https://www.wireshark.org/docs/wsug_html_chunked/ChPluginFolders.html
make sure btatt protocol is enabled
filter for e.g. victron
single messages (on btatt.handle 0x0024 and others) from device to host are decoded. btatt.handle 0x0027 is a kind of streaming format where multiple messages are concatenated and split over many btatt messages. These cannot be reassembled at the moment, neither the BT l2cap disscetor nor the BT ATT dissector seem to implement packet reassembly.
the files victron_... contain device specific sequences to trigger value update messages as well as UUID mappings to receive the messages from the host bluetooth stack
victron.pyThe protocol decoder is a mess registers BT mac addresses in its main function
Messages from device to host are partially understood, messages from host to devuce have not be included. The sequences to trigger vallue update messages have been observed while using the VictronConnect app.
The protocol uses very few BT attribute handles, most values are transportet in separate messages using btatt.handle 0x0024. A streaming format spanning BT packets is used on btatt.handle 0x0027 and others, this should be reassembled by the python decoder, padding at end of squence consisting of varying 0xFF is not implemented atm.