waggle-sensor wagman issues

waggle-sensor / wagman

The Waggle Manager (Wagman), a custom circuit board and control system for Wild Waggle Nodes

1 stars 3 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Usage of Wire library.

#30 Koepel opened 5 years ago
1
Working Wagman now stuck in bootloader

#29 seanshahkarami closed 6 years ago
1
Add command acknowledgments for each part of the communication pipeline.

#28 seanshahkarami closed 7 years ago
3
Add more sensible bounds on certain timers

#27 seanshahkarami opened 7 years ago
0
Document the system processes

#26 seanshahkarami opened 7 years ago
0
Wagman Command Documentation

#25 seanshahkarami closed 7 years ago
0
Reorganize Wagman.ino

#24 seanshahkarami opened 7 years ago
0
Add time unit constants

#23 seanshahkarami opened 7 years ago
0
Clean up the way devices / hardware are modeled

#22 seanshahkarami opened 7 years ago
0
Clean up how commands are sent over the wire

#21 seanshahkarami opened 7 years ago
0
Background updating of environment sensors

#20 seanshahkarami opened 7 years ago
0
Better abstraction of platform independent pieces

#19 seanshahkarami opened 7 years ago
0
Move towards more scheduler / event driven code

#18 seanshahkarami opened 7 years ago
1
Formalize EEPROM layout

#17 seanshahkarami opened 7 years ago
0
Unify / extend live configuration parameters

#16 seanshahkarami opened 7 years ago
0
Wagman V3.1 : Bootloader Install and Firmware Upgrade Issues

#15 Rumpkie closed 7 years ago
4
Branch acs764

#14 gemblerz opened 7 years ago
0
Verify that all reads have timeout.

#13 seanshahkarami closed 8 years ago
1
Fail Safe Flag for Bootloader in EEPROM

#12 seanshahkarami closed 8 years ago
2
Combined Current Behavior

#11 seanshahkarami closed 8 years ago
0
SSH / Heartbeat

#10 seanshahkarami closed 8 years ago
2
Modem Hanging

#9 seanshahkarami closed 8 years ago
2
Split Stop / Reset Behavior

#8 seanshahkarami closed 8 years ago
1
Stop disabled devices showing up in logging / update loop.

#7 seanshahkarami closed 8 years ago
1
Sync EEPROM memory layout in code and what's in layout document.

#6 seanshahkarami closed 8 years ago
1
Verify Boot Selection Cycle

#5 seanshahkarami closed 8 years ago
3
Correct behavior for log messages sent in between commands.

#4 seanshahkarami closed 8 years ago
1
Need self check for PORF case.

#3 seanshahkarami closed 8 years ago
1
Verify Port Address Mappings

#2 seanshahkarami closed 8 years ago
1
Watchdog / Bootloader Lockup

#1 seanshahkarami closed 8 years ago
1