Step 1: Download and enter the Waveshare-DSI-LCD driver folder

git clone https://github.com/waveshare/Waveshare-DSI-LCD cd Waveshare-DSI-LCD

Step 2: Enter uname -a in the terminal to view the kernel version and cd to the corresponding file directory

5.15.61 then run the following command

cd 5.15.61

5.15.76 then run the following command

cd 5.15.76

Step 3: Please check the bits of your system, enter the 32 directory for 32-bit systems, and enter the 64 directory for 64-bit systems

cd 32

cd 64

Step 4: Enter your corresponding model command to install the driver, pay attention to the selection of the I2C DIP switch

2.8inch DSI LCD 480×640：

sudo bash ./WS_xinchDSI_MAIN.sh 28 I2C0

3.4inch DSI LCD (C) 800×800

sudo bash ./WS_xinchDSI_MAIN.sh 34C I2C0

4inch DSI LCD 480×800：

sudo bash ./WS_xinchDSI_MAIN.sh 40 I2C0

4inch DSI LCD (C) 720×720

sudo bash ./WS_xinchDSI_MAIN.sh 40C I2C0

7inch DSI LCD (C) 1024×600：

sudo bash ./WS_xinchDSI_MAIN.sh 70C I2C1

7.9ich DSI LCD 400×1280：

sudo bash ./WS_xinchDSI_MAIN.sh 79 I2C0

11.9inch DSI LCD 320×1480：

sudo bash ./WS_xinchDSI_MAIN.sh 119 I2C0

8inch DSI LCD (C) 1280×800驱动：

sudo bash ./WS_xinchDSI_MAIN.sh 80C I2C0

10.1inch DSI LCD (C) 1280×800驱动：

sudo bash ./WS_xinchDSI_MAIN.sh 101C I2C0

Step 5: Wait for a few seconds, when the driver installation is complete and no error is prompted, restart and load the DSI driver and it can be used normally

sudo reboot

Note: The above steps need to ensure that the Raspberry Pi can be connected to the Internet normally.

第一步：下载并进入Waveshare-DSI-LCD驱动文件夹

git clone https://github.com/waveshare/Waveshare-DSI-LCD cd Waveshare-DSI-LCD

第二步：终端输入uname -a查看内核版本，并cd到对应文件目录

5.15.61则运行下面指令

cd 5.15.61

5.15.76则运行下面指令

cd 5.15.76

第三步：请确定当前使用的系统是多少位的，32位系统进入32目录，64位系统进入64目录

cd 32

cd 64

第四步：选择您对应的型号，复制指令安装驱动，如需修改I2C0 / I2C1，请注意选择正确的拨码开关再上电使用；

2.8inch DSI LCD 480×640：

sudo bash ./WS_xinchDSI_MAIN.sh 28 I2C0

3.4inch DSI LCD (C) 800×800

sudo bash ./WS_xinchDSI_MAIN.sh 34C I2C0

4inch DSI LCD 480×800：

sudo bash ./WS_xinchDSI_MAIN.sh 40 I2C0

4inch DSI LCD (C) 720×720

sudo bash ./WS_xinchDSI_MAIN.sh 40C I2C0

7inch DSI LCD (C) 1024×600：

sudo bash ./WS_xinchDSI_MAIN.sh 70C I2C1

7.9ich DSI LCD 400×1280：

sudo bash ./WS_xinchDSI_MAIN.sh 79 I2C0

11.9inch DSI LCD 320×1480：

sudo bash ./WS_xinchDSI_MAIN.sh 119 I2C0

8inch DSI LCD (C) 1280×800 ：

sudo bash ./WS_xinchDSI_MAIN.sh 80C I2C0

10.1inch DSI LCD (C) 1280×800：

sudo bash ./WS_xinchDSI_MAIN.sh 101C I2C0

第五步：等待几秒，当驱动安装完成，没有提示任何报错时，进行重启加载DSI驱动即可正常使用

sudo reboot

注意：以上步骤需要确保树莓派可以正常连接到互联网。