Drawer Organizer

Parametric 3d design for a modular drawer organizer. See https://www.thingiverse.com/thing:3827538 for examples.

It is intended to be used with FDM 3D printers.

Printing Instructions

I used the following settings:

• 0.4mm nozzle
• two perimeters
• two bottom layers
• zero infill for most parts, the long divider get 3% to avoid bulges
• remove elephant foot 0.15mm

I printed parts with PLA for the first tests and PETG for the final thing. Both worked fine.

Other people successfully used:

• 0.8mm extrusion width
• 1 perimeter

to speed up printing.