A simple Flask-based spelunker for poking around Who's On First data stored in an Elasticsearch) document index.
The spelunker is very much a tool to help work through what the public-facing resource (spelunker) should as it is to help us (Mapzen) visualize and sanity check the data. The spelunker does many things but it does not do everything yet, or in some cases ever.
This package has been archived and replaced by the whosonfirst/go-whosonfirst-spelunker and whosonfirst/go-whosonfirst-spelunker-httpd packages.
The Who's On First spelunker is primarily designed for running on a Ubuntu Linux distribution. It's not designed for a Ubuntu distribution so adapting it to another platform shouldn't be difficult but that is not work we've done yet.
There is also a handy vagrant-whosonfirst-www-spelunker Vagrant package for building all the software dependencies and running a copy of the spelunker on your local machine. That's probably a good (better) place to start if you just want to poke around a local copy of the Who's On First data.
If you're feeling confident or dangerous or both there is a handy Makefile included that will attempt to install and configure everything you need to fire up a copy of the spelunker over an encrypted connection at https://localhost/. Like this:
make build-localNote that default build scripts will create a self-signed TLS certificate so you should expect your browser to display a security warning. The build target is actually just a wrapper around three other targets: setup-local, data and index which are all (hopefully) self-explanatory but the gorey details follow below.
Currently all the packaging and dependencies target a modern Ubuntu Linux distribution. There is little (nothing) that is really Ubuntu-specific but in the interest of getting things done that's the focus right now. All of scripts to install the spelunker and its dependencies are found in the ubuntu folder so you can run them each atomically if you need to. There are also one Makefile target for installing all the software and indexing the data. Like this:
make setup-localThese are separate targets because depending on the machine you're using indexing the data can take quite a long time. Please be sure to read the section on data (below) for charging ahead and invoking the Makefile or installing software.
The convention is to store all Who's On First (WOF) data in a root /usr/local/mapzen/whosonfirst-data directory. That is however just a convention. For the purposes of the spelunker we care about the location of WOF data in three places:
make-data.sh script which will fetch WOF data "bundles" from the Internet and store them locally, as part of the build-local Makefile target.The ubuntu/make-data.sh script is a small tool that will download bundled versions of [common placetypes in WOF]() and store them in a sub-directory of this repository called data. You can override the destination folder by passing in a path (to a folder) as the first argument to the script. For example:
$> ubuntu/make-data.sh /path/to/some-other/whosonfirst-data/folderThat's just the default though. Another option is to download one or more Who's On First data repositories to a location of your choosing and to index and serve them using the [wof-roundhouse-repod]() tool. For example:
./bin/wof-roundhouse-repod /usr/local/mapzen/whosonfirst-data*
2017/07/03 15:50:47 start indexing whosonfirst-data-venue-us-ca at 2017-07-03 15:50:47.808249449 +0000 UTC
2017/07/03 15:50:47 start indexing whosonfirst-data at 2017-07-03 15:50:47.809042249 +0000 UTC
2017/07/03 15:50:47 start indexing whosonfirst-data-venue-ca at 2017-07-03 15:50:47.810867862 +0000 UTC
2017/07/03 15:51:27 time to index whosonfirst-data-venue-ca: 39.240279572s
2017/07/03 15:51:32 time to index whosonfirst-data: 44.511392089s
2017/07/03 15:51:51 time to index whosonfirst-data-venue-us-ca: 1m3.898184345s
2017/07/03 15:51:51 time to index all: 1m3.898692508swof-roundhouse-repod will index which repository a given record is and read the corresponding file when requested. You might use wof-roundhouse-repod if you are using the Spelunker on a local [Vagrant machine]() where you have already downloaded WOF data to the host machine (aka "your laptop") and are mounting those repositories as individual shared volumes.
The default nginx config defines a single /data/ location but under the hood it is checking a number of possible sources a data file. First it checks the local (to this repository) data directory. If the requested file isn't found it then tries the same request against a wof-roundhouse-repod endpoint. Finally, if that doesn't work it asks https://whosonfirst.mapzen.com/data for the file. This is what that looks like, from nginx's perspective:
location /data/ {
sendfile on;
sendfile_max_chunk 1m;
tcp_nopush on;
try_files $uri @data_local;
}
location @data_local {
root /usr/local/mapzen/whosonfirst-www-spelunker/data;
add_header 'Access-Control-Allow-Origin' '*';
add_header 'Access-Control-Allow-Methods' 'GET';
proxy_intercept_errors on;
recursive_error_pages on;
error_page 404 = @data_repod;
}
location @data_repod {
proxy_set_header Authorization '';
proxy_hide_header Set-Cookie;
proxy_ignore_headers "Set-Cookie";
add_header 'Access-Control-Allow-Origin' '*';
add_header 'Access-Control-Allow-Methods' 'GET';
proxy_pass http://127.0.0.1:8080$uri;
proxy_intercept_errors on;
recursive_error_pages on;
error_page 404 = @data_mapzen;
}
location @data_mapzen {
proxy_set_header Authorization '';
proxy_hide_header Set-Cookie;
proxy_ignore_headers "Set-Cookie";
add_header 'Access-Control-Allow-Origin' '*';
add_header 'Access-Control-Allow-Methods' 'GET';
resolver 8.8.8.8;
proxy_pass https://whosonfirst.mapzen.com$uri;
}You should feel free to adjust accordingly as your needs dictate.
Finally the JavaScript code that runs in the Spelunker is told where to look for data files in the mapzen.whosonfirst.config.js file, like this:
var endpoint = document.body.getAttribute("data-wof-data-endpoint");
if (endpoint == ""){
var root = location.protocol + "//" + location.host;
endpoint = root + "/data/";
}
mapzen.whosonfirst.uri.endpoint(endpoint);The default data endpoint is the current host + /data/ but you can override this in your whosonfirst-www-spelunker-flask.cfg config file, like this:
[spelunker]
data_root=https://whosonfirst.mapzen.com/data/When the Spelunker starts up it will read that value and assign it to the data-wof-data-endpoint attribute that will in turn be read by the JavaScript code above. Remember: The JavaScript code doesn't know (or care) what or where the nginx server is looking for files. It assumes there is a single endpoint that will take care of all the details.
wof-es-index -s /usr/local/mapzen/whosonfirst-data/data -b