RDTech Power Supply Controller via ESPHome
This is a configuration for ESPHome that allows you to control the RDTech (aka Riden/Riuden) RD series of power supplies via Home Assistant.
Model support
- RD6006: ✅
- RD6018: ✅
- RD6006P:✅
- RD6012: ✅
- RD6024: 🛑 Not properly supported, as there is no Unisoft firmware yet.
Credits
This repo was based on a Python project by Baldanos.
What you'll need:
- A Riden RD power supply with WiFi module
- An FTDI adapter
- A Home Assistant installation with ESPHome
How to:
- Flash your device with the UniSoft firmware
- Create a new ESPHome device and load this configuration
- Update your WiFi credentials in ESPHome
- Flash the Riden WiFi module with ESPHome
- Set the right settings in the Riden power supply:
- UART Interface to "TTL+EN"
- UART Baudrate to "115200"
- Address to "1"
- Skip keys lock to "ON"