search

wneessen / apg-go

🔒 A modern "Automated Password Generator"-clone written in Go
MIT License
32 stars 6 forks source link
apg go golang golang-application hacktoberfest password password-generator passwords

readme

A "Automated Password Generator"-clone

Go Reference Go Report Card codecov #apg-go on Discord REUSE status OpenSSF Best Practices buy ma a coffee

apg-go logo

apg-go is a simple APG-like password generator written in Go. It tries to replicate the functionality of the "Automated Password Generator", which hasn't been maintained since 2003. Since more and more Unix distributions are abandoning the tool, I was looking for an alternative. FreeBSD for example recommends "security/makepasswd", which is written in Perl but requires a lot of dependency packages and doesn't offer the feature-set/flexibility of APG.

Since FIPS-181 (pronounceable passwords) has been withdrawn in 2015, apg-go does not follow this standard. Instead, it implements the Koremutake Syllables System in its pronounceable password mode.

Examples

This section provides some examples on how to use apg-go for common password generation tasks.

Login password for a website

$ apg-go -C -f 20 -n 1
Zq#lIY?=?J@4_\X@\xtf

Note: Nowadays 20 random characters are still considered secure for passwords. You might want to adjust the -f parameter if you require a longer password.

PIN generation

$ apg-go -M lusN -f 6 -n 1
952170

Note: A code example on how to programatically build a PIN generator with apg-go, can be found here: pin-generator.

Phone verification phrase (pronounceable)

$ apg-go -a 0 -m 15 -x 15 -t -n 1
vEbErlaFryaNgyex (vE-bEr-la-Fry-aN-gy-ex)

We generated a 15-character long pronounceable phrase with syllables output, for easy use in e. g. a phone verification process.

Cryptographic key for encryption

$ apg-go -a 3 -f 32 -bh

We generated a 32 bytes/256 bits long fully binary secret that can be used i. e. as encryption key for a AES-256 symmetric encryption. The output is represented in hexadecimal format.

Installation

Docker

There is a ready-to-use Docker image hosted on Github.

Go install

apg-go can be installed using the go install command if you have Go installed on your system. This requires that you have Go installed on your system and that your Go version matches or is higher than the version required in go.mod. You can install various versions using go install.

Binary releases/Packages

On the Github release page you will always find pre-build binaries for all supported OS and architectures. You will also find pre-built packages for the most common Linux distributions. Each file is digitally signed via GPG. After downloading the corresponding file, make sure that the file is verified with the GPG signature. The public GPG key is: "Winni Neessen" (Software signing key) wn@neessen.dev

FreeBSD

apg-go can be found as /security/apg in the FreeBSD ports tree.

Arch Linux

Find apg-go in Arch Linux AUR. Alternatively use the pre-build zst-package of the latest release in this git repository

Debian/Redhat/Alpine

Pre-build packages in .deb, .rpm and .apk format can be found on release page in this git repository

Binary installation on Linux/BSD/MacOS

Sources

Systemwide installation

It is recommed to install apg in a directory of your $PATH environment. To do so run: (In this example we use /usr/local/bin as system-wide binary path. YMMV)

$ sudo cp apg /usr/local/bin/apg

Programmatic interface

Since v1.0.0 the CLI and the main package functionality have been separated from each other, which makes it easier to use the apg-go package in other Go code as well. This way you can make of the password generation in your own code without having to rely on the actual apg-go binary.

A code example on how to use the package can be found in the example-code directory.

Usage examples

Default behaviour

By default apg-go will generate 6 passwords, with a minimum length of 12 characters and a maxiumum length of 20 characters. The generated password will use a character set constructed from lower case, upper case and numeric characters.

$ apg-go
R8rCC8bw5NvJmTUK2g
cHB9qogTbfdzFgnH
hoHfpWAHHSNa4Q
QyjscIsZkQGh
904YqsU5SnoqLo2w
utdFKXdeiXFzM

Modifying the character sets

Old style

Let's assume you want to generate a single password, constructed out of upper case, numeric and special characters. Since lower case is part of the default set, you would need to disable them by setting the -L parameter. In addition you would set the -S parameter to enable special characters. Finally the parameter -n 1 is needed to keep apg-go from generating more than one password:

$ apg-go -n 1 -L -S
XY7>}H@5U40&_A1*9I$

New/modern style

Since the old style switches can be kind of confusing, it is recommended to use the "new style" parameters instead. The new style is all combined in the -M parameter. Using the upper case version of a parameter argument enables a feature, while the lower case version disabled it. The previous example could be represented like this in new style:

$ apg-go -n 1 -M lUSN
$</K?*|M)%8\U$5JA5~

Human readability

Generated passwords can sometimes be a bit hard to read for humans, especially when ambiguous characters are part of the password. Some characters in the ASCII character set look similar to each other. In example it can be hard to differentiate an upper case I from a lower case l. Same applies to the number zero (0) and the upper case O. To not run into issues with human readability, you can set the -H parameter to toggle on the "human readable" feature. When the option is set, apg-go will avoid using any of the typical ambiguous characters in the generated passwords.

$ apg-go -n 1 -M LUSN -H
YpranThY3b6b5%\6ARx

Character exclusion

Let's assume, that for whatever reason, your generated password can never include a colon (:) sign. For this specific case, you can use the -E parameter to specify a list of characters that are to be excluded from the password generation character set:

$ apg-go -n 1 -M lUSN -H -E :
~B2\%E_|\VV|/5C7EF=

Complex passwords

If you want to generate complex passwords, there is a shortcut for this as well. By setting the -C parameter, apg-go will automatically default to the most secure settings. The complex parameter basically implies that the password will use all available characters (lower case, upper case, numeric and special) and will make sure that human readability is disabled.

$ apg-go -n 1 -C
{q6cvz9le5_fo"X7

Password length

By default, apg-go will generate a password with a random length between 12 and 20 characters. If you want to be more specific, you can use the -m and -x parameters to override the defaults. Let's assume you want a single complex password with a length of exactly 32 characters you can do so by running:

$ apg-go -n 1 -C -m 32 -x 32
5lc&HBvx=!EUY*;'/t&>B|~sudhtyDBu

Alternatively, since v1.0.0 apg-go has the new -f flag, which allows to request a fixed length password. Instead of using -m and -x you can just use -f 32 to get a 32 character long password:

$ apg-go -n 1 -C -f 32
O"Q\d0zT'@(1f~%_56O*!q[!9:z[~\A*

Password spelling

If you need to read out a password, it can be helpful to know the corresponding word for that character in the phonetic alphabet. By setting the -l parameter, agp-go will provide you with the phonetic spelling (english language) of your newly created password:

$ apg-go -n 1 -M LUSN -H -E : -l
fUTDKeFsU+zn3r= (foxtrot/Uniform/Tango/Delta/Kilo/echo/Foxtrot/sierra/Uniform/PLUS_SIGN/zulu/november/THREE/romeo/EQUAL_SIGN)

Pronouncable passwords

Since v0.4.0 apg-go supports pronounceable passwords, anologous to the original c-apg using the -a 0 flag. The original c-apg implemented FIPS-181, which was withdrawn in 2015 for generating pronounceable passwords. Since the standard is not recommended anymore, apg-go instead make use of the Koremutake Syllables System. Similar to the original apg, agp-go will automatically randomly add special characters and number (from the human-readable pool) to each generated pronounceable password. Additionally it will perform a "coinflip" for each Koremutake syllable and decided if it should switch the case of one of the characters to an upper-case character.

Using the -t parameter, apg-go will display a spelled out version of the pronounceable password, where each syllable or number/special character is seperated with a "-" (dash) and if the syllable is not a Koremutake syllable the character will be spelled out the same was as with activated -l in the non-pronounceable password mode (-a 1).

Note on password length: The -m and -x parameters will work in prouncable password mode, but please keep in mind, that due to the nature how syllables work, your generated password might exceed the desired length by one complete syllable (which can be up to 3 characters long).

Security consideration: Please keep in mind, that pronounceable passwords are less secure compared to truly randomly created passwords, due to the nature how syllables work. As a rule of thumb, it is recommended to multiply the length of your generated pronounceable passwords by at least 1.5 times, compared to truly randomly generated passwords. It might also be helpful to run the pronoucable password mode with enabled "HIBP" flag, so that each generated password is automatically checked against "Have I Been Pwned" database.

$ apg-go -a 0 -n 1
KebrutinernMy

$ apg-go -a 0 -n 1 -m 15 -x 15 -t
pEnbocydrageT*En (pEn-bo-cy-dra-geT-ASTERISK-En)

Coinflip mode

Sometimes you just want to quickly perform a simple, but random coinflip. Since v1.0.0 apg-go has a coinflip mode, which will return either "Heads" or "Tails". To use coinflip mode, use the -a 2 argument:

$ apg-go -n 10 -a 2
Tails
Tails
Heads
Heads
Tails
Tails
Tails
Tails
Heads
Heads

Binary mode

Since v1.1.0 apg-go has a new algorithm for binary secrets. This is a very basic mode that will ignore most of the available options, as it will only generate binary secrets with full 256 bits of randomness. The only available options for this mode are: -f to set the length of the returned secret in bytes, -bh to tell apg-go to output the generated secret in hexadecial representation and -bn to instruct apg-go to return a newline after the generated secret. Any other option available in the other modes will be ignored.

This mode can be useful for example if you need to generate a AES-256 encryption key. Since 32 bytes is the default length for the secret generation in this mode, you can simply generate a secret key with the following command:

$ apg-go -a 3 -bh
a1cdab8db365af3d70828b1fe43b7896190c157ad3f1ae2a0a1d52ec1628c6b5

For ease for readability we used the -bh flag, to instruct apg-go to output the secret in its hexadecimal representation

Mobile-friendly character grouping

Since v1.2.0 apg-go supports grouping of characters in a mobile-friendly manner. Entering a random string of characters with a smartphone touch screen is tedious and error prone due to the need to toggle keypads to gain access to different character tables. For this reason, this feature groups the characters of the generated password in "keypad-order". It does so by groupoing the characters into character groups. The following precedense is used: Upper-case characters, lower-case characters, numeric values, any other character.

Example:

$ apg-go -C -f 20 -n 1 -g
CETMPGGxuamj346!)>})

Please note that this feature makes the generated passwords much more predictable and lowers the entropy of the generated password. Please use this feature with caution

Minimum required characters

Even though in apg-go you can select what kind of characters are used for the password generation, it is not guaranteed, that if you request a password with a numeric value, that the generated password will actually have a numeric value. Since v1.0.0 apg-go has a new set of arguments, that let's you define a minimum amount of characters of a specific character class to be included in the generated password. This can be requested with the -mL, -mN, -mS and -mU arguments. Each stands for the corresponding character class. If one of the arguments is give, apg-go will generate passwords until the requested amount of characters of the corresponding class is given.

Note on minimum characters: Please keep in mind, that due to the way the "minimum amount" feature works, the calculation time for passwords can increase and if the amount is set too high, it can result in apg-go never being able to finish the job.

Example:

$ apg-go -n 10 -a 1 -M NLUs -f 20 -mN 3
kqFG935E280LvTFUbJ4M
RVBJAI5tJ6hy6oWrNfXG
uy1IWBEoOQFyG66VrLqu
T5k9oKieImvJ9hxePfHt
0TTpGzMUje6mU7IXaSII
gvDjPmlj8J6glR0iy0h4
C5OP3Ph7bx173v0gRNsn
SEuP7I3en6ai9OuHvNSs
yira1uPQ8qmo5OKUM4Er
bu0nzhjoKn8Uiy3H2RjD

Have I Been Pwned

Even though, the passwords that apg-go generated for you, are secure, there is a minimal chance, that someone on the planet used exactly the same password before and that this person was part of an internet leak or hack, which exposed the password to the public. Such passwords are not considered secure anymore as they usually land on public available password lists, that are used by crackers.

To be on the safe side, you can use the -p parameter, to enable a HIBP check. When the feature is enabled, apg-go will check the HIBP database at https://haveibeenpwned.com if that password has been leaked before and provide you with a warning if that is the case.

Please be aware, that this is a live check against the HIBP API, which not only requires internet connectivity, but also might take between 500ms to 1s to complete. When you generating a bigger list of password -n 100, the process could take much longer than without the -p feature enabled.

CLI parameters

apg-go replicates most of the parameters of the original c-apg. Some parameters are different though:

Contributors

Thanks to the following people for contributing to the apg-go codebase: