search

wolfSSL / wolfssl-nginx

Adds wolfSSL support to Nginx.
https://www.wolfssl.com
34 stars 14 forks source link
gplv3 http-tls13 nginx nginx-source secure-webserver security tls13 wolfssl wolfssl-nginx wolfssl-support

readme

wolfssl-nginx

wolfSSL Support in Nginx

wolfSSL is supported in Nginx. There are minor changes to the Nginx code base and recompilation is required.

The tested versions:

Building

First you will need Nginx source package and wolfSSL source code.

Now build and install wolfSSL. Please make sure to configure wolfSSL with ./configure --prefix=/usr/local --enable-nginx.

To enable wolfSSL support in Nginx the source code must be patched:

  1. Change into the Nginx source directory.
  2. Apply patch: patch -p1 < /nginx--wolfssl.patch

Now rebuild Nginx:

  1. Configure Nginx with this command (extra options may be added as required):
    • ./configure --with-wolfssl=/usr/local --with-http_ssl_module
  2. Build Nginx: make

Testing

nginx-tests

Nginx has a repository of tests that can be obtained with the following command:

To run the tests see the nginx-tests README. Tests are expected to pass with exceptions. An example of running the tests:

  1. Change into the nginx-tests directory.
  2. Run tests: TEST_NGINX_BINARY=../nginx-<nginx-version>-wolfssl/objs/nginx prove .

There are patch sets available in the nginx-tests-patches directory for the nginx-tests testsuite. These patches fix issues with running the tests against a version of Nginx that was compiled with wolfSSL. They also add some further debug capabilities. The patch file names are in the structure:

<year>-<month>-<day>-<nginx-tests commit>.patch

The patch should be applied before running any tests using patch -p1 < <path/to/patch>. The date and commit hash in the file name refer to the version of nginx-tests that the patch was prepared for.

Debugging nginx-tests

To use the new gdbserver feature, the Nginx configuration of the test needs to be changed to include master_process off;. This can be done for all tests with the following sed command. Please note that some tests rely on on a master and worker process structure. Please check if the test passes without configuration changes first.

sed -e 's/daemon off;/master_process off;\ndaemon off;/g' -i *.t

For an easy way to remove all of the master_process off; changes, please use this perl command: 

perl -0777 -i -pe 's/master_process off;\n//g' *.t

nginx-tests Caveats

Without applying the appropriate patchset, there will be failures of SSL tests for the following reasons:

Note: the file ssl_ecc.t in wolfssl-nginx can be used with the Nginx test system. Note: the file ssl_stapling.t.patch can be used to patch the ssl_stapling.t file in nginx-tests to work with wolfSSL. The version available in the testing repository uses different certs on the same server. This is not supported by wolfSSL so this patch moves the certs to separate server instances.

Internal Tests

There are additional tests available in wolfssl-nginx. These are in addition to the Nginx tests. The OpenSSL's superapp is required for OCSP Stapling testing. To test:

  1. Change into wolfssl-nginx directory.
  2. Run the script: ./test.sh (If using IPv6 then set IPV6=yes.)
  3. When working, the number of FAIL and UNKNOWN will be 0.

Testing is only supported on Linux with bash.

Post-Quantum Algorithms

Starting with wolfSSL version 5.1.0 and nginx version 1.21.4, You can now enable the integration of liboqs in wolfSSL thus enabling post-quantum algorithms for your HTTPS connections over TLS 1.3.

First, you will need to build the OpenQuantumSafe group's liboqs and their fork of OpenSSL to generate the certificate chain that uses the post-quantum FALCON signature scheme. Instructions for that are in wolfSSL git repository's INSTALL file. Note that when you generate your certificates, you will need to add your IP address as a subject alternative name. See here for more details: https://www.openssl.org/docs/manmaster/man5/x509v3_config.html

When building wolfSSL, you will need to add a couple extra flags:

./configure --prefix=/usr/local --enable-nginx --with-liboqs
make all
make check
sudo make install

Now, you can continue on with the instructions for building nginx above, but also apply the nginx-1.21.4-pq.patch patch.

Now that all the software is built and installed, you will need to add a section in the nginx.conf file to enable TLS 1.3 and use the correct certificates. Edit /usr/local/nginx/conf/nginx.conf. Nginx's install process should have put a default version there. Search for the section with the title HTTPS server and replace that section with the following:

    server {
        listen                    443 ssl;
        server_name               localhost;

        ssl_certificate           /path/to/falcon_level5_entity_cert.pem;
        ssl_certificate_key       /path/to/falcon_level5_entity_key.pem;

        ssl_session_cache         shared:SSL:1m;
        ssl_session_timeout       5m;

        ssl_protocols             TLSv1.3;
        ssl_ciphers               TLS_AES_256_GCM_SHA384;
        ssl_prefer_server_ciphers on;

        location / {
            root   html;
            index  index.html index.htm;
        }
    }

NOTE: You will need to change the path of the certificate and key.

You can now execute the nginx web server by doing the following:

sudo /usr/local/nginx/sbin/nginx

Check /usr/local/nginx/logs/error.log to see if there were any errors and ensure that /usr/local/nginx/logs/nginx.pid exists. It is created upon successful launch of the server daemon process.

NOTE: You will need to change the path of the root certificate and use your IP address.

Licensing

wolfSSL and wolfCrypt are either licensed for use under the GPLv3 (or at your option any later version) or a standard commercial license. For users who cannot use wolfSSL under GPLv3 (or any later version), a commercial license to wolfSSL and wolfCrypt is available. For license inquiries, please contact wolfSSL Inc. directly at licensing@wolfssl.com.

The NGINX patches in this repository are licensed under their respective project licenses.

Support

For support or build issues, please contact the wolfSSL support team at support@wolfssl.com.