search

wraith-wireless / PyRIC

Python wireless library for Linux
http://wraith-wireless.github.io/PyRIC
Other
95 stars 50 forks source link

readme

PyRIC 0.1.6.4: Python Radio Interface Controller

Linux wireless library for the Python Wireless Developer and Pentester

License: GPLv3 PyPI Version Supported Python Versions Software status

1 DESCRIPTION:

PyRIC (is a Linux only) library providing wireless developers and pentesters the ability to identify, enumerate and manipulate their system's wireless cards programmatically in Python. Pentesting applications and scripts written in Python have increased dramatically in recent years. However, these tools still rely on Linux command lines tools to setup and prepare and restore the system for use. Until now. Why use subprocess.Popen, regular expressions and str.find to interact with your wireless cards? PyRIC is:

  1. Pythonic: no ctypes, SWIG etc. PyRIC redefines C header files as Python and uses sockets to communicate with the kernel.
  2. Self-sufficient: No third-party files used. PyRIC is completely self-contained.
  3. Fast: (relatively speaking) PyRIC is faster than using command line tools through subprocess.Popen
  4. Parseless: Get the output you want without parsing output from command line tools. Never worry about newer iw versions and having to rewrite your parsers.
  5. Easy: If you can use iw, you can use PyRIC.

At it's heart, PyRIC is a Python port of (a subset of) iw and by extension, a Python port of Netlink w.r.t nl80211 functionality. The original goal of PyRIC was to provide a simple interface to the underlying nl80211 kernel support, handling the complex operations of Netlink seamlessy while maintaining a minimum of "code walking" to understand, modify and extend. But, why stop there? Since it's initial inception, PyRIC has grown. PyRIC puts iw, ifconfig, rfkill, udevadm, airmon-ng and macchanger in your hands (or your program).

a. Additions to iw

Several "extensions" have been added to iw (See docs/PyRIC.pdf for more information):

These are minimal changes but they can improve the performance of any progams that needs to access the wireless nic repeatedly as shown in the table below.

chset Total Avg Longest Shortest
Popen(iw) 588.3059 0.0588 0.0682 0.0021
one-time 560.3559 0.0560 0.0645 0.0003
persistent 257.8293 0.0257 0.0354 0.0004

The table shows benchmarks for hop time on a Alfa AWUS036NH 10000 times. Note that there is no implication that PyRIC is faster than iw. Rather, the table shows that PyRIC is faster than using Popen to execute iw. Using one-time sockets, there is a difference of 28 seconds over Popen and iw with a small decrease in the average hoptime. Not a big difference. However, the performance increased dramatically when persistent netlink sockets are used with the total time and average hop time nearly halved.

b. Current State

PyRIC is in the process of porting compatibility to Python 3. At present, it will work on Python 2.7 and Python 3.5. It will also work on Python 3.0 except you will have to manually enter your devices in the examples (as argparse is not supported) and you will not be able to run pyw.unittest.py.

ATT, PyRIC provides the following:

In utils, several helpers can be found that can be used to:

For a full listing of every function offered by pyw and helpers see the user guide PyRIC.pdf.

PyRIC also provides limited help functionality concerning nl80211 commands/attributes for those who wish to add additional commands. However, it pulls directly from the comments nl80211 header file and may be vague.

c. What is PyRIC?

To avoid confusion, PyRIC is the system as a whole, including all header files and "libraries" that are required to communicate with the kernel. pyw is a interface to these libraries providing specific funtions.

What it does - defines programmatic access to a subset of iw, ifconfig and rkill. In short, PyRIC provides Python wireless pentesters the ability to work with wireless cards directly from Python without having to use command line tools through Popen.

2. INSTALLING/USING:

a. Requirements

PyRIC has only two requirements: Linux and Python. There has been very little testing (on my side) on kernel 4.x and Python 3 but unit testing confirms functionality on Python 2.7 and kernel 3.13.x.

b. Install from Package Manager

Obviously, the easiest way to install PyRIC is through PyPI:

sudo pip install PyRIC

c. Install from Source

The PyRIC source (tarball) can be downloaded from https://pypi.python.org/pypi/PyRIC or http://wraith-wireless.github.io/PyRIC. Additionally, the source, as a zip file, can be downloaded from https://github.com/wraith-wireless/PyRIC. Once downloaded, extract the files and from the PyRIC directory run:

sudo python setup.py install

d. Test without Installing

If you just want to test PyRIC out, download your choice from above. After extraction, move the pyric folder (the package directory) to your location of choice and from there start Python and import pyw. It is very important that you do not try and run it from PyRIC which is the distribution directory. This will break the imports pyw uses.

You will only be able to test PyRIC from the pyric directory but, if you want to, you can add it to your Python path and run it from any program or any location. To do so, assume you untared PyRIC to /home/bob/PyRIC. Create a text file named pyric.pth with one line

/home/bob/PyRIC

and save this file to /usr/lib/python2.7/dist-packages (or /usr/lib/python3/dist-packages if you want to try it in Python 3).

e. Stability vs Latest

Keep in mind that the most stable version and easist installallation but oldest release is on PyPI (installed through pip). The source on http://wraith-wireless.github.io/PyRIC tends to be newer but may have some bugs. The most recent source but hardest to install is on https://github.com/wraith-wireless/pyric/releases/ It is not guaranteed to be stable (as I tend to commit changes periodically while working on the code) and may in fact not run at all.

3. USING

To use PyRIC, see the examples folder or read throuhg PyRIC.pdf. However, for those impatient types:

import pyric             # pyric errors
import pyric.pyw as pyw  # iw functionality

will import the basic requirements and unless otherwise stated is assumed for the examples below. It is also assumed that the system is in the US and has three devices lo, eth0 and wlan0 (only wlan0 of course being wireless). Keep in mind that these examples use one-time sockets.

Although not all functions require root, we assume that the below have been executed with root permissions.

Before proceeding with the examples, let's talk about pyric error handling. The pyric module imports the errorcodes found in the errno module as its own. The pyric error subclasses EnvironmentError and all pyric errors are tuples of the form t = (error code,error message).

>>> try:
...     #some pyric code
... except pyric.error as e:
...     #handle the error

Read the user guide, or type dir(pyw) in your console to get a full listing of all pyw functions.

The examples below can also be run with named arguments.

a. System/Wireless Core Functionality

These functions do not work with a specific device rather with the system.

>>> pyw.interfaces() # get all system interfaces
['lo','eth0','wlan']
>>> pyw.isinterface('eth0') # deterimine if eth0 is an interface
True
>>> pyw.isinterface('bob0')
False
>>> pyw.winterfaces() # get all system wireless interfaces
['wlan0']
>>> pyw.isinterface('eth0') # check eth0 for wireless
False
>>> pyw.iswireless('wlan0')
True
>>> pyw.phylist() # list all current phys (Note device ASW phy1)
[(1,'phy1), (0, 'phy0')]
>>> pyw.regget() # get the regulatory domain
'US'
>>> pyw.regset('BO') # set the regulatory domain
True
>>> pyw.regget()
'BO'
>>>

b. Interface Specific

Recall that PyRIC utilizes a Card object - this removes the necessity of having to remember what to pass each function i.e. whether you have to pass a device name, physical index or ifindex. Unless otherwise stated, we will be using the card w0 instantiated as:

>>> w0 = pyw.getcard('wlan0') # get a card for wlan0
>>> w0
Card(phy=0,dev='wlan0',ifindex=2)

There are other methods to get a Card object:

It is also important to note while most functions require a Card object, some do not and some will take a Card or a specific identifier. Read the user guide or code for additional information.

Before continuing you may find that a Card can become invalid. For example, I have an older system where the USB tends to fall out. You can confirm that your card is still valid:

>>> pyw.validcard(w0)
True
>>>

i. Why is my Card not Working?

Sometimes you may need to turn your Card on, or possibly unblock it.

>>> pyw.isup(w0)
True
>>> pyw.down(w0)
>>> pyw.isup(w0)
False
>>> pyw.up(w0)
>>> pyw.isblocked(w0) # returns tup;e (Soft Block, Hard Block)
(True,False)
>>> pyw.unblock(w0) # turn off the softblock
>>> pyw.isblocked(w0)
(False,False)
>>>

ii. Working with Mac and IP Addresses

>>> mac = pyw.macget(w0) # get the hw addr
>>> mac
'a0:b1:c2:d3:e4:f5'
>>>
>>> pyw.down(w0): # turn the card off to set the mac
>>> pyw.macset(w0,'00:1F:32:00:01:00') # lets be a nintendo device
>>> pyw.up(w0) # bring wlan0 back up
>>> pyw.macget(w0) # see if it worked
'00:1F:32:00:01:00'
>>>
>>> pyw.inetget(w0) # not associated, inet won't return an address
(None, None, None)
>>> # NOTE: to set the inet, bcast or netmask, the card does not have to be down
...
>>> pyw.inetset(w0,'192.168.3.23','255.255.255.192','192.168.3.63')
True
>>> pyw.inetget(w0)
('192.168.3.23', '255.255.255.192', '192.168.3.255')
>>>
>>> # You can also use ip4set, netmaskset and broadcastset

It is important to note that (like ifconfig), erroneous values can be set when setting the inet addresses: for example you can set the ip address on 192.168.3.* network with a broadcast address of 10.255.255.255.

iii. WLAN Radio Properties

You may want to set power management or other radio properties when pentesting. Particulary, if you are configuring a rogue AP.

>>> pyw.pwrsaveget(w0)
True
>>> pyw.pwrsaveset(w0, False) # turn off powermanagement
>>> pyw.pwrsaveget(w0)
False
>>> pyw.covclassset(w0, 1) # set the coverage class
pyric.error: [Errno 95] Operation not supported
>>> # My internal intel card does not support setting the coverage class
...
>>> pyw.retryshortset(w0, 5)
>>> pyw.retrylongset(w0, 5)
>>> # We'll check these values out shortly
...
>>> pyw.rtsthreshset(w0, 1024)
>>> pyw.fragthreshset(w0, 8000)
>>>

For a brief description of coverage class and retry limits, see http://www.computerhope.com/unix/iwconfig.htm. For a description of the RTS and Fragmentation thresholds see http://resources.infosecinstitute.com/rts-threshold-configuration-improved-wireless-network-performance/. The IEEE 802.11-2012 also covers these.

iv. Getting Info On Your Card

>>> iinfo = pyw.ifinfo(w0)
>>> for i in iinfo: print i, iinfo[i]
... 
mask 255.255.255.192
driver iwlwifi
hwaddr a0:88:b4:9e:68:58
chipset Intel 4965/5xxx/6xxx/1xxx
bcast 192.168.3.63
inet 192.168.3.7
manufacturer Intel Corporate
>>>
>>> dinfo = pyw.devinfo(w0)
>>> for d in dinfo: print d, dinfo[d]
...
wdev 1
RF None
CF None
mac 00:1F:32:00:01:00
mode managed
CHW None
card Card(phy=0,dev=wlan0,ifindex=3)
>>> # NOTE: since we are not associated, RF, CF and CHW are None
...
>>> pyw.txget(w0)
20
>>> pyw.devstds(w0)
['b', 'g', 'n']
>>> pinfo = pyw.phyinfo(w0) # dict with 12 key->value pairs see info.py
>>> for p in pinfo: print p, pinfo[p]
...
>>> pinfo['retry_short'], pinfo['retry_long']
(5, 5)
>>> pinfo['rts_thresh'], pinfo['frag_thresh']
(1024, 8000)
>>> pinfo['cov_class']
0
>>> pinfo['generation']
1
>>> pinfo['scan_ssids']
20
>>> pinfo['ciphers']
['WEP-40', 'WEP-104', 'TKIP', 'CCMP']
>>>
>>> pinfo['modes']
['ibss', 'managed', 'AP', 'AP VLAN', 'monitor']
>>> pinfo['swmodes']
['AP VLAN', 'monitor']
>>>
>>> pinfo['commands']
[u'new_interface', u'set_interface', u'new_key', u'start_ap', u'new_station',
u'new_mpath', u'set_mesh_config', u'set_bss', u'authenticate', u'associate',
u'deauthenticate', u'disassociate', u'join_ibss', u'join_mesh',
u'set_tx_bitrate_mask', u'frame', u'frame_wait_cancel', u'set_wiphy_netns',
u'set_channel', u'set_wds_peer', u'probe_client', u'set_noack_map',
u'register_beacons', u'start_p2p_device', u'set_mcast_rate', u'connect',
u'disconnect']
>>>
>>> for d in pinfo['bands']:
...     print 'Band: ', d, pinfo['bands'][d]['HT'], pinfo['bands'][d]['VHT']
...     pinfo['bands'][d]['rates']
...     pinfo['bands'][d]['rfs']
... 
Band:  5GHz True False
[6.0, 9.0, 12.0, 18.0, 24.0, 36.0, 48.0, 54.0]
[5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5500, 5520, 5540, 5560, 
5580, 5600, 5620, 5640, 5660, 5680, 5700, 5745, 5765, 5785, 5805, 5825]
Band:  2GHz HT True False
[1.0, 2.0, 5.5, 11.0, 6.0, 9.0, 12.0, 18.0, 24.0, 36.0, 48.0, 54.0]
[2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462, 2467, 
2472]
>>>

v. Virtual Interfaces

In my experience, virtual interfaces are primarily used to recon, attack or some other tomfoolery but can also be used to analyze your wireless network. In either case, it is generally advised to create a virtual monitor interface and delete all others (on the same phy) - this makes sure that some external process like NetworkManager does not interfere with your shenanigans. In the below example, in addition to creating an interface in monitor mode, we find all interfaces on the same physical index and delete them. You may not need to do this.

NOTE: When creating a device in monitor mode, you can also set flags (see NL80211_MNTR_FLAGS in nl80211_h), although some cards (usually atheros) do not always obey these flag requests.

>>> 'monitor' in pyw.devmodes(w0) # make sure we can set wlan0 to monitor
True
>>>
>>> m0 = pyw.devadd(w0,'mon0','monitor') # create mon0 in monitor mode
>>> m0
Card(phy=0,dev=mon0,ifindex=4)
>>> pyw.winterfaces()
['mon0', 'wlan0']
>>> for card,_ in pyw.ifaces(w0):   # delete all interfaces
...     print card
...     if not card.dev == m0.dev:  # that are not our monitor
...         pyw.devdel(card)        # on the this phy
...
(Card(phy=0,dev=mon0,ifindex=4), 'monitor')
(Card(phy=0,dev=wlan0,ifindex=3), 'managed')
>>>
>>>
>>> pyw.txget(w0)
15
>>> pyw.txset(w0,30,'fixed')
>>> # NOTE: my card does not support setting the tx power.
...
>>> pyw.up(m0) # bring the new card up to use
>>> pyw.chset(m0,6,None) # and set the card to channel 6
True
>>>

NOTE: If you don't want to add a virtual interface, you can set the mode of a current one with modeset.

Once you are done, you will probably want to delete the virtual interface and restore your original one.

>>> w0 = pyw.devadd(m0,'wlan0','managed') # restore wlan0 in managed mode
>>> pyw.devdel(m0) # delete the monitor interface
True
>>> pyw.up(w0) # and bring the card up
>>>

So, perhaps you do not care for the previous method of creating a card in monitor mode and deleting all associated interfaces and would prefer to execute an airmon-ng(ish) method. 

>>> w0
Card(phy=0,dev='wlan0',ifindex=2)
>>> w1 = pyw.devset(w0, 'wlan1')
>>> w1
Card(phy=0,dev=wlan1,ifindex=3)
>>> pyw.modeset(w1, 'monitor')
>>> pyw.up(w1)
>>> pyw.chset(w1, 1, None)

The above commands replicate the behaviour of airmon-ng. To verify, open a command prompt and execute the following:

?> iw dev wlan0 info # replace wlan0 with your nic
Interface wlan0
    ifindex 3
    wdev 0x1
    addr a0:88:b4:9e:68:58
    type managed
    wiphy 0
?> sudo airmon-ng start wlan0
Found 2 processes ...
?> 
?> iw dev wlan0mon info 
Interface wlan0mon
    ifindex 6
    wdev 0x2
    addr a0:88:b4:9e:68:58
    type monitor
    wiphy 0
    channel 10 (2457 MHz), width: 20 MHz (no HT), center1: 2457 MHz
?>
?> sudo airmon-ng stop wlan0mon
...
?> iw dev wlan0 info
Interface wlan0
    ifindex 7
    wdev 0x3
    addr a0:88:b4:9e:68:59
    type managed
    wiphy 0

As you can see, under the covers, airmon-ng deletes the specified nic (wlan0 in this example), creates a new one, sets the mode to monitor and sets the channel (10 in this case). While the physical index remains the same, wiphy 0, the ifindex and wdev change. So, what looks like a simple renaming of your nic and setting the mode to monitor is in face multiple steps requiring several communications with the kernel. As stated previously, I prefer the first method of setting a card to monitor because by deleting all associated interfaces, there is a smaller risk of some other process interfering with you.

If you wanted, you could easily write your own python function to replicate airmon-ng programmatically. as done below

import pyric
import pyric.pyw as pyw
import pyric.lib.libnl as nl

def pymon(card, start=True, ch=None):
    """
     sets the Card card monitor mode or returns it to managed mode
     :param card: a Card object
     :param start: True = set|False = reset
     :param ch: initial ch to start on
     :returns: the new card
    """
    newcard = None
    if start:
        if pyw.modeget(card) == 'monitor':
            raise RuntimeError("Card is already in monitor mode")
        newcard = pyw.devset(card, card.dev + 'mon')
        pyw.modeset(newcard, 'monitor')       
        pyw.up(newcard)
        if ch: pyw.chset(w1, ch, None) 
    else:
        if pyw.modeget(card) == 'managed':
            raise RuntimeError("Card is not in monitor mode")
        newcard = pyw.devset(card, card.dev[:-3])
        pyw.modeset(newcard, 'managed')        
        pyw.up(newcard)
    return newcard
o Virtual Interfaces and Issues in Kernel 4.x

After recently upgrading my distro, my kernel was upgraded from 3.x to 4.x. I noticed that in some situations, adding a virtual interface (VIF) did not have the desired effect. Namely, new VIFs did not have the dev name I had specified. Furthermore, regardless of the naming convention I was currently using (old school like wlan0, eth0 etc or the newer predictable names i.e. wlp3s0) the new VIF would have a predictable name and the MAC address would be one up from that of the actual cards MAC address. For more details, check out my blog at https://wraithwireless.wordpress.com/2016/07/24/linux-kernel-bug/. This is an issue at the kernel and nl80211 level and not a PyRIC bug.

This situtation will only occur if you are attempting to (a) create a VIF with the same dev name as the original, (b) in managed mode and (c) there are currently other VIFs sharing the same phy. 

>>> pyw.winterfaces()
['alfa0']
>>> card = pyw.getcard('alfa0')
>>> card
Card(phy=1,dev=alfa0,ifindex=5)
>>> mcard
Card(phy=1,dev=mon0,ifindex=6)
>>> pyw.devdel(card)
>>> pyw.winterfaces()
['mon0']
>>> pyw.devadd(mcard,'alfa0','managed')
Card(phy=1,dev=alfa0,ifindex=7)
>>> pyw.winterfaces()
['mon0', 'wlx00c0ca59afa7']
>>> pyw.devdel(pyw.getcard('wlx00c0ca59afa7'))
>>> pyw.winterfaces()
['wlan0mon', 'mon0']
>>> pyw.phyadd(mcard,'alfa0','managed')
Card(phy=1,dev=alfa0,ifindex=8)
>>> pyw.winterfaces()
['wlan0mon', 'mon0', 'wlx00c0ca59afa7']

All three of the above most be True for this to occur. So, for example:

>>> pyw.winterfaces()
['mon0']
>>> pyw.devadd(mcard,'alfa0','monitor')
Card(phy=1,dev=alfa0,ifindex=10)
>>> pyw.winterfaces()
['mon0', 'alfa0']

works because case (b) is false.

Some things to note:

I had considered several options of rectifying this for PyRIC but, doing so would require either mutliple checks on kernel version or breaking backward compatibility for users with kernel 3.x and possibly breaking forward compatibility (if this issue does get fixed at some future kernel version). Besides, being aware of the state that must be true for this to happen, users can easily workaround it.

One way, as we saw earlier, is to create a VIF in monitor mode and then set it to managed.

>>> pyw.winterfaces()
['mon0']
>>> pyw.devadd(mcard,'alfa0','monitor')
Card(phy=1,dev=alfa0,ifindex=10)
>>> pyw.winterfaces()
['mon0', 'alfa0']
>>> pyw.devdel(pyw.getcard('mon0'))
>>> card = pyw.getcard('alfa0')
>>> pyw.down(card)
>>> pyw.modeset(card,'managed')
>>> pyw.up
<function up at 0x7f76339c99b0>
>>> pyw.up()
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: up() takes at least 1 argument (0 given)
>>> pyw.up(card)
>>> pyw.winterfaces()
['wlan0mon', 'alfa0']
>>> pyw.devinfo(card)
{'wdev': 4294967302, 'RF': None, 'CF': None, 'mac': '00:c0:ca:59:af:a6', 
'mode': 'managed', 'CHW': None, 'card': Card(phy=1,dev=alfa0,ifindex=10)}

But, I think this is sloppy. The better way is to use phyadd. Recall that phyadd accepts either a Card or the phy and that even though a card is deleted, some of its reference values are still valid. In the case of deleting a card, the phy is still present. So, you could use a phy or a Card that was previously deleted because the phy is still valid. 

>>> pyw.winterfaces()
['mon0']
>>> phy = mcard.phy
>>> pyw.devdel(mcard)
>>> pyw.winterfaces()
[]
>>> card = pyw.phyadd(phy,'alfa0','managed')
>>> card
Card(phy=1,dev=alfa0,ifindex=12)
>>> pyw.winterfaces()
['alfa0']

This works, but remember you have to delete all interfaces with the same phy as the one you are creating before creating it.

vi. STA Related Functions

I have recently begun adding STA functionality to PyRIC. These are not necessarily required for a pentester, although the ability to disconnect a Card may come in handy. The difficulty is that iw only provides connect functionality through Open or WEP enabled APs which means that I am attempting to determine which commands and attributes are required. If all else fails I will look to wpa_supplicant for more information. Additionally, iw will not connect if wpa_supplicant is running.

>>> pyw.isconnected(w0)
True
>>> pyw.disconnect(w0)
>>> pyw.isconnected(w0)
False
>>>

From a pentester's point of view iw link provides information of limited quality/concern but can be useful at times. As such, link has now been implemented. 

>>> link=pyw.link(w0)
>>> for d in link:
...     print d, link[d]
... 
stat associated
ssid ****net
bssid XX:YY:ZZ:00:11:22
chw 20
int 100
freq 5765
tx {'pkts': 256, 'failed': 0, 'bytes': 22969, 'bitrate': {'rate': 6.0}, 
    'retries': 31}
rx {'pkts': 29634, 'bitrate': {'width': 40, 'rate': 270.0, 
    'mcs-index': 14, 'gi': 0}, 'bytes': 2365454}
rss -50
>>>

NOTE: the rx gives additional key->value pairs for bitrate. Depending on whether the Card is transmitting (or receiving) 802.11n, the bitrate may include values for width, mcs-index and guard interval (gi). If we look up these values in Table 20-35 of IEEE Std 802.11-2012, we see that at 40 MHz width, an mcs-index of 14 with a short guard interval (400ns) the rate = 270.

One can also use pyw.stainfo to retrieve only tx/rx metrics.

vii. Miscelleaneous Utilities

Several additional tools are located in the utils directory. Two of these are:

hardware.py Driver, chipset and mac address related functions can be found here:

import pyric.utils.hardware as hw

ouis = hw.parseoui() # load the oui dict
len(ouis)
=> 22128

mac = 'a0:88:b4:9e:68:58'
dev = 'wlan0'

hw.oui(mac)
=> 'a0:88:b4'

hw.ulm(mac)
=> '9e:68:58'

hw.manufacturer(ouis,mac)
=> 'Intel Corporate'

hw.randhw(ouis) # generate a random mac address
=>'00:03:f0:5a:a1:fc'

hw.manufacturer(ouis,'00:03:f0:5a:a1:fc')
=> 'Redfern Broadband Networks'

hw.ifcard('wlan0') # get driver & chipset
=> ('iwlwifi', 'Intel 4965/5xxx/6xxx/1xxx')

rfkill.py Sometimes, your card has a soft block (or hard block) on it and it is not recognized by command line tools or pyw. Use rkill to list, turn on or turn off soft blocks.

import pyric.utils.rfkill as rfkill

rfkill.rfkill_list() # list rfkill devices
=> {'tpacpi_bluetooth_sw': {'soft': True, 'hard': False, 'type': 'bluetooth', 'idx': 1},
    'phy3': {'soft': False, 'hard': False, 'type': 'wlan', 'idx': 5},
    'phy0': {'soft': False, 'hard': False, 'type': 'wlan', 'idx': 0}}

idx = rfkill.getidx(3)
idx
=> 5

rfkill.getname(idx)
=> phy3

rfkill.gettype(idx)
=> 'wlan'

rfkill.soft_blocked(idx)
=> False

rfkill.hard_blocked(idx)
=> False

rfkill.rfkill_block(idx)

rfkill.list()
=> {'tpacpi_bluetooth_sw': {'soft': False, 'hard': True, 'type': 'bluetooth', 'idx': 1},
    'phy3': {'soft': True, 'hard': True, 'type': 'wlan', 'idx': 5},
    'phy0': {'soft': True, 'hard': True, 'type': 'wlan', 'idx': 0}}

rfkill.rfkill_unblock(idx)

rfkill.rfkill_list()
=> {'tpacpi_bluetooth_sw': {'soft': True, 'hard': False, 'type': 'bluetooth', 'idx': 1},
    'phy3': {'soft': False, 'hard': False, 'type': 'wlan', 'idx': 5},
    'phy0': {'soft': False, 'hard': False, 'type': 'wlan', 'idx': 0}}

Note that rfkill_list lists all 'wireless' devices: wlan, bluetooth, wimax, wwan, gps, fm and nfc. Another important thing to note is that the rfkill index is not the same as the interface index.

4. EXTENDING:

Extending PyRIC is fun and easy too, see the user guide PyRIC.pdf.

5. ARCHITECTURE/HEIRARCHY:

Brief Overview of the project file structure. Directories and/or files annotated with (-) are not included in pip installs or PyPI downloads