YateBTS is an open source GSM Base Station software.
You can use this software to create a 2G GSM network, either standalone or connected to the public telephony network.
The use of a non-DSP aproach for GSM protocol together with a SIP implementation that supports an IMS core and SS7 core network makes it a disruptive technology.
Please see the INSTALL file for information of how to download, build and install YateBTS.
YateBTS is a module for the Yate telephony engine.
You will need to configure Yate to load it and also YateBTS itself.
The module is configured by the ybts.conf file. Depending on the install method you may have just an ybts.conf.sample which you will need to copy as ybts.conf
As a minimum you will need to configure the radio band and frequency (ARFCN) on which YateBTS will operate. Please read the minimal instructions at top of ybts.conf.sample
Depending on the transceiver you will need to edit the path setting in ybts.conf:
[transceiver]
Path=./transceiver
replace ./transceiver with ./transceiver-rad1 or ./transceiver-uhd or ./transceiver-usrp1
Alternatively you may create a symbolic link to the desired transceiver:
cd /usr/lib64/yate/bts (or wherever it is installed)
ln -s transceiver-rad1 transceiver
The Network In a PC (NiPC) is a configuration that allows using YateBTS standalone with just local subscribers.
To use it you need to configure in Yate:
In file javascript.conf:
[general] routing=welcome.js
[scripts] nipc=nipc.js
In file extmodule.conf:
[scripts] gsm_auth.sh
For more info see: http://wiki.yatebts.com/index.php/Javascript_NiPC