search

yellows8 / 3ds_smashbroshax

3DS wifi beaconhax for Super Smash Bros.
69 stars 13 forks source link

Able to send packets but exploit doesnt activate. #4

Open Destroxz opened 8 years ago

Destroxz commented 8 years ago

I have a N3DS and was forced to update to 10.3.0-28U, so does smashhax work on 10.3 or does it still have to be updated? Thank you! ( smash bros is on ver 1.1.2 eshop version)

yellows8 commented 8 years ago

No reason why not if you use the right payload -> http://3dbrew.org/wiki/10.3.0-28

Destroxz commented 8 years ago

I noticed that in terminal it says that the mac address doesnt match the specified mac address. ( I am using the the smashhaxEZ method that Cydget put together and the new payload)

yellows8 commented 8 years ago

That's normal.

Destroxz commented 8 years ago

Oh okay, then I believe I am doing everything right, the packets reach about 12k and still nothing :( Thanks anyways!

yellows8 commented 8 years ago

Are you broadcasting on channel 6?

Destroxz commented 8 years ago

I am new to Linux I don't know what that means :S I only followed the tutorial that cydget put out.

yellows8 commented 8 years ago

https://github.com/yellows8/3ds_smashbroshax#usage-guide

yellows8 commented 8 years ago

Works fine here with gamecard Smash v1.1.2 + New3DS 10.3.0-28U.

Destroxz commented 8 years ago

I just did the full tutorial now but it still doesnt activate I dont know why. :(

Destroxz commented 8 years ago

Also this time I dont have the mac address thing, I installed the new starter kit on my sd card along with 10.3 otherapp payload and renamed to smashpayload.bin and I am successful at sending packets but my game doesnt act when I open group.

yellows8 commented 8 years ago

How long did you let your system at the group session-scanning menu?

Destroxz commented 8 years ago

Sorry I was mistaken the mac still says doesnt match, but that is normal as u said.

Destroxz commented 8 years ago

The most I left it is until 12 or 16k packets at 9-10pps. Cant remeber if 12 or 16k. Well over 5 minutes I think maybe even 10.

yellows8 commented 8 years ago

Maybe try capturing a frame being broadcasted, then upload it.

Destroxz commented 8 years ago

Sorry, but what do you mean by capturing a frame? :S

yellows8 commented 8 years ago

Use Wireshark/whatever.

Destroxz commented 8 years ago

I downloaded wireshark but i dont know how to use it. :S

Destroxz commented 8 years ago

1447175665386-594948366

Thats what I did I hope it's right.

yellows8 commented 8 years ago

Save that pcap and upload it.

Destroxz commented 8 years ago

frame I changed the extension because I cant attach pcapng, so just change the extension to open it.

yellows8 commented 8 years ago

Looks fine to me, can't think of anything that could be wrong other than broadcasting on the wrong wifi channel(can't tell what channel you're using by the pcap).

 sudo iwconfig wlan0 channel 6
Destroxz commented 8 years ago

I did use channel 6, is putting sudo necessary even if I am root?

yellows8 commented 8 years ago

No.

"I did use channel 6" :-/

Destroxz commented 8 years ago

It's really weird is there something I am doing wrong? Oh well, this was my only way to get homebrew, looks like I will have to wait for a new vuln to be found in 10.3. :/ does it have to do with my internal wifi card? Or as long as packets are being sent then everything should be fine?

yellows8 commented 8 years ago

"can't think of anything that could be wrong"

Destroxz commented 8 years ago

Oh well, thanks a ton for your time, really appreciate it! :)

Destroxz commented 8 years ago

Its weird though, because a guy with and o3ds 10.3 managed to get the payload to run but then crashes to home menu, and I am here with a N3ds and not even payload running :S

Destroxz commented 8 years ago

Btw, (i know thats not the place for this but)I also tried getting a prepatched oot3dhax save when I was on 10.2 and it says data corrupted and formats.

yellows8 commented 8 years ago

" prepatched oot3dhax save when I was on 10.2 and it says data corrupted and formats." <- Wait for the release-archive @ oot3dhax repo later I guess.

Destroxz commented 8 years ago

Okay :) oh yeah and by prepatched I meant that I got a save file from someone that had oothax and recovered the save to mmy cartridge using powersaves

profi200 commented 8 years ago

Not every WiFi dongle/card is compatible or works well with smashbroshax. With my build in WiFi card it worked directly for example.

Destroxz commented 8 years ago

Yeah, but if it sends it means that its working, because when I use the usb dongle it doesnt work, but internal wifi works.

Kudinchou commented 8 years ago

I have a similar problem, when you run aireplay-ng charged 10 packets per second, but when loading with smashbros - group does not load the homebrew launcher (PS: I have a usademo and OLD 3DS 10.3.28U, or is it impossible to work in the OLD 3DS?)

ihaveamac commented 8 years ago

smashbroshax doesn't load the *hax/homebrew launcher payload on Old 3DS.

Kudinchou commented 8 years ago

😭 thanks friend, and no update to the version browserhax to 1.7626?

benoittachet commented 7 years ago

I have the same problem, with a N3DS 11.2.0-35E and SSB 1.0.1 I've seen two or three tutorials on internet, including the one in the repo's readme, all differents, and no one working... I have extract the homebrew starter kit at my SD's root, put the payload at the same place, and launched aireplay-ng on my wifi device, but nothing comes... I saw in the readme that we have to use ctr-wlanbeacontool, but I didn't found how... Thank you for your answers, everyone.