powerbutton
This is a remote power controller for Raspberry Pi 3 mode B.
How to setup.
You should make sure you have wiringPi and git-core installed before you git clone the repository!
sudo apt-get install -y wiringPi
sudo apt-get install -y git-core
cd ~
sudo mv ~/powerbutton/gpioshutdown /etc/init.d/
sudo chmod +x /etc/init.d/gpioshutdown
sudo vim.tiny /etc/rc.local
add this two lines before exit 0
gpio mode 25 out
gpio write 25 1
[optional]
You can modify your /boot/config.txt file as config.txt.
have fun