v0.1
This is the firmware for an EggBot-style SphereBot. The firmware directly interprets GCode send over the serial port.
There will be more information on the SphereBot at http://pleasantsoftware.com/developer/3d (in the near future...)
!!!!!!!! This sketch needs the following non-standard libraries (install them in the Arduino library directory): SoftwareServo: http://www.arduino.cc/playground/ComponentLib/Servo TimerOne: http://www.arduino.cc/playground/Code/Timer1 !!!!!!!!
Copyright 2011 by Eberhard Rensch http://pleasantsoftware.com/developer/3d
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/
Part of this code is based on/inspired by the Helium Frog Delta Robot Firmware by Martin Price http://www.HeliumFrog.com
To create tags File: ctags --langmap="C++:+.pde" S*
GCode commands:
G90 Absolut modus G91 Icremental modus:
M300S0 Servo 0 degree M300S90 Servo 90 degree
M18 Stepper off
G0X0Y40 Rapid movement (pen 0mm, rotation 40mm) G1X40Y0 Slower movement (pen 40mm, rotation 0mm) G1Y10F660 Movement with feed 660mm/s (rotation 10mm)
; Comment ( .. ) Comment