Open justnibio opened 6 years ago
I have the exact same issue
The Xorg error is attached
[ 88150.629]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 88150.629] X Protocol Version 11, Revision 0
[ 88150.629] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[ 88150.630] Current Operating System: Linux raspberrypi 4.14.34-v7+ #1110 SMP Mon Apr 16 15:18:51 BST 2018 armv7l
[ 88150.630] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=da63f069-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles plymouth.enable=0
[ 88150.631] Build Date: 18 October 2017 04:55:30PM
[ 88150.631] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[ 88150.632] Current version of pixman: 0.34.0
[ 88150.632] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 88150.632] Markers: (--) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 88150.634] (==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Tue May 29 20:52:19 2018
[ 88150.634] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 88150.635] (==) No Layout section. Using the first Screen section.
[ 88150.635] (==) No screen section available. Using defaults.
[ 88150.635] () |-->Screen "Default Screen Section" (0)
[ 88150.635] () | |-->Monitor "
[ 88150.650] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1 [ 88150.651] (II) no primary bus or device found [ 88150.651] (II) LoadModule: "glx" [ 88150.652] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 88150.656] (II) Module glx: vendor="X.Org Foundation" [ 88150.656] compiled for 1.19.2, module version = 1.0.0 [ 88150.656] ABI class: X.Org Server Extension, version 10.0 [ 88150.656] (II) LoadModule: "fbturbo" [ 88150.657] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so [ 88150.657] (II) Module fbturbo: vendor="X.Org Foundation" [ 88150.657] compiled for 1.19.2, module version = 0.5.1 [ 88150.657] Module class: X.Org Video Driver [ 88150.657] ABI class: X.Org Video Driver, version 23.0 [ 88150.657] (II) FBTURBO: driver for framebuffer: fbturbo [ 88150.657] (WW) Falling back to old probe method for fbturbo [ 88150.657] (II) Loading sub module "fbdevhw" [ 88150.657] (II) LoadModule: "fbdevhw" [ 88150.660] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 88150.661] (II) Module fbdevhw: vendor="X.Org Foundation" [ 88150.661] compiled for 1.19.2, module version = 0.0.2 [ 88150.661] ABI class: X.Org Video Driver, version 23.0 [ 88150.661] (II) FBTURBO(0): using /dev/fb0 [ 88150.661] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 88150.661] (II) FBTURBO(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 88150.661] (==) FBTURBO(0): Depth 24, (==) framebuffer bpp 32 [ 88150.661] (==) FBTURBO(0): RGB weight 888 [ 88150.661] (==) FBTURBO(0): Default visual is TrueColor [ 88150.661] (==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0) [ 88150.661] (II) FBTURBO(0): hardware: BCM2708 FB (video memory: 3600kB) [ 88150.661] () FBTURBO(0): Option "fbdev" "/dev/fb0" [ 88150.661] () FBTURBO(0): Option "SwapbuffersWait" "true" [ 88150.662] (II) FBTURBO(0): processor: Unknown [ 88150.662] (II) FBTURBO(0): checking modes against framebuffer device... [ 88150.662] (II) FBTURBO(0): checking modes against monitor... [ 88150.662] (--) FBTURBO(0): Virtual size is 1280x720 (pitch 1280) [ 88150.662] () FBTURBO(0): Built-in mode "current" [ 88150.662] (==) FBTURBO(0): DPI set to (96, 96) [ 88150.662] (II) Loading sub module "fb" [ 88150.662] (II) LoadModule: "fb" [ 88150.662] (II) Loading /usr/lib/xorg/modules/libfb.so [ 88150.663] (II) Module fb: vendor="X.Org Foundation" [ 88150.663] compiled for 1.19.2, module version = 1.0.0 [ 88150.663] ABI class: X.Org ANSI C Emulation, version 0.4 [ 88150.663] (==) Depth 24 pixmap format is 32 bpp [ 88150.664] (II) FBTURBO(0): using backing store heuristics [ 88150.665] (WW) LoadKernelModule: Setting of real/effective user Id to 0/0 failed[ 88150.669] (II) FBTURBO(0): can't load 'g2d_23' kernel module [ 88150.669] (II) FBTURBO(0): failed to enable the use of sunxi display controller [ 88150.669] (II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d) [ 88150.669] (II) FBTURBO(0): G2D hardware acceleration can't be enabled [ 88150.669] (II) FBTURBO(0): enabled fbdev copyarea acceleration [ 88150.669] (==) FBTURBO(0): Backing store enabled [ 88150.670] (==) FBTURBO(0): DPMS enabled [ 88150.670] (II) FBTURBO(0): failed to enable hardware cursor [ 88150.670] (II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP [ 88150.670] (II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log [ 88150.670] (==) RandR enabled [ 88150.689] (II) SELinux: Disabled on system [ 88150.691] (II) AIGLX: Screen 0 is not DRI2 capable [ 88150.692] (EE) AIGLX: reverting to software rendering [ 88151.518] (II) IGLX: enabled GLX_MESA_copy_sub_buffer [ 88151.523] (II) IGLX: Loaded and initialized swrast [ 88151.523] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 88151.831] (II) config/udev: Adding input device YSTEK MICREAL USB Gamepad (/dev/input/event2) [ 88151.831] (II) No input driver specified, ignoring this device. [ 88151.831] (II) This device may have been added with another device file. [ 88151.833] (II) config/udev: Adding input device YSTEK MICREAL USB Gamepad (/dev/input/js0) [ 88151.833] (II) No input driver specified, ignoring this device. [ 88151.833] (II) This device may have been added with another device file. [ 88151.835] (II) config/udev: Adding input device YSTEK MICREAL USB Gamepad (/dev/input/event3) [ 88151.835] (II) No input driver specified, ignoring this device. [ 88151.835] (II) This device may have been added with another device file. [ 88151.837] (II) config/udev: Adding input device YSTEK MICREAL USB Gamepad (/dev/input/js1) [ 88151.837] (II) No input driver specified, ignoring this device. [ 88151.838] (II) This device may have been added with another device file. [ 88151.840] (II) config/udev: Adding input device Logitech M510 (/dev/input/event4) [ 88151.840] () Logitech M510: Applying InputClass "libinput pointer catchall" [ 88151.840] (II) LoadModule: "libinput" [ 88151.840] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 88151.849] (II) Module libinput: vendor="X.Org Foundation" [ 88151.849] compiled for 1.19.0, module version = 0.23.0 [ 88151.849] Module class: X.Org XInput Driver [ 88151.849] ABI class: X.Org XInput driver, version 24.1 [ 88151.849] (II) Using input driver 'libinput' for 'Logitech M510' [ 88151.851] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19 paused 0 [ 88151.851] () Logitech M510: always reports core events [ 88151.851] () Option "Device" "/dev/input/event4" [ 88151.851] () Option "_source" "server/udev" [ 88151.853] (II) input device 'Logitech M510', /dev/input/event4 is tagged by udev as: Mouse [ 88151.853] (II) Device 'Logitech M510' set to 800 DPI [ 88151.853] (II) input device 'Logitech M510', /dev/input/event4 is a pointer caps [ 88151.854] () Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:1025.0008/input/input4/event4" [ 88151.854] (II) XINPUT: Adding extended input device "Logitech M510" (type: MOUSE, id 6) [ 88151.854] () Option "AccelerationScheme" "none" [ 88151.854] () Logitech M510: (accel) selected scheme none/0 [ 88151.854] () Logitech M510: (accel) acceleration factor: 2.000 [ 88151.854] () Logitech M510: (accel) acceleration threshold: 4 [ 88151.856] (II) input device 'Logitech M510', /dev/input/event4 is tagged by udev as: Mouse [ 88151.856] (II) Device 'Logitech M510' set to 800 DPI [ 88151.856] (II) input device 'Logitech M510', /dev/input/event4 is a pointer caps [ 88151.858] (II) config/udev: Adding input device Logitech M510 (/dev/input/mouse1) [ 88151.858] (II) No input driver specified, ignoring this device. [ 88151.858] (II) This device may have been added with another device file. [ 88151.861] (II) config/udev: Adding input device mini keyboard (/dev/input/event0) [ 88151.861] () mini keyboard: Applying InputClass "libinput keyboard catchall" [ 88151.861] (II) Using input driver 'libinput' for ' mini keyboard' [ 88151.862] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 22 paused 0 [ 88151.862] () mini keyboard: always reports core events [ 88151.862] () Option "Device" "/dev/input/event0" [ 88151.862] () Option "_source" "server/udev" [ 88151.864] (II) input device ' mini keyboard', /dev/input/event0 is tagged by udev as: Keyboard [ 88151.864] (II) input device ' mini keyboard', /dev/input/event0 is a keyboard [ 88151.864] () Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1997:2433.0005/input/input0/event0" [ 88151.864] (II) XINPUT: Adding extended input device " mini keyboard" (type: KEYBOARD, id 7) [ 88151.864] () Option "xkb_model" "pc105" [ 88151.864] () Option "xkb_layout" "gb" [ 88151.932] (II) input device ' mini keyboard', /dev/input/event0 is tagged by udev as: Keyboard [ 88151.932] (II) input device ' mini keyboard', /dev/input/event0 is a keyboard [ 88151.935] (II) config/udev: Adding input device mini keyboard (/dev/input/event1) [ 88151.935] () mini keyboard: Applying InputClass "libinput pointer catchall" [ 88151.935] () mini keyboard: Applying InputClass "libinput keyboard catchall" [ 88151.935] (II) Using input driver 'libinput' for ' mini keyboard' [ 88151.936] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 23 paused 0 [ 88151.936] () mini keyboard: always reports core events [ 88151.936] () Option "Device" "/dev/input/event1" [ 88151.937] () Option "_source" "server/udev" [ 88151.938] (II) input device ' mini keyboard', /dev/input/event1 is tagged by udev as: Keyboard Mouse [ 88151.938] (II) input device ' mini keyboard', /dev/input/event1 is a pointer caps [ 88151.938] (II) input device ' mini keyboard', /dev/input/event1 is a keyboard [ 88151.939] (II) libinput: mini keyboard: needs a virtual subdevice [ 88151.939] () Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:2433.0006/input/input1/event1" [ 88151.939] (II) XINPUT: Adding extended input device " mini keyboard" (type: MOUSE, id 8) [ 88151.939] () Option "AccelerationScheme" "none" [ 88151.939] () mini keyboard: (accel) selected scheme none/0 [ 88151.939] () mini keyboard: (accel) acceleration factor: 2.000 [ 88151.939] () mini keyboard: (accel) acceleration threshold: 4 [ 88151.941] (II) input device ' mini keyboard', /dev/input/event1 is tagged by udev as: Keyboard Mouse [ 88151.941] (II) input device ' mini keyboard', /dev/input/event1 is a pointer caps [ 88151.941] (II) input device ' mini keyboard', /dev/input/event1 is a keyboard [ 88151.943] (II) config/udev: Adding input device mini keyboard (/dev/input/mouse0) [ 88151.943] (II) No input driver specified, ignoring this device. [ 88151.943] (II) This device may have been added with another device file. [ 88151.953] () mini keyboard: Applying InputClass "libinput pointer catchall" [ 88151.953] () mini keyboard: Applying InputClass "libinput keyboard catchall" [ 88151.953] (II) Using input driver 'libinput' for ' mini keyboard' [ 88151.954] (II) systemd-logind: returning pre-existing fd for /dev/input/event1 13:65 [ 88151.954] () mini keyboard: always reports core events [ 88151.954] () Option "Device" "/dev/input/event1" [ 88151.954] () Option "_source" "_driver/libinput" [ 88151.954] (II) libinput: mini keyboard: is a virtual subdevice [ 88151.954] () Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:2433.0006/input/input1/event1" [ 88151.954] (II) XINPUT: Adding extended input device " mini keyboard" (type: KEYBOARD, id 9) [ 88151.954] () Option "xkb_model" "pc105" [ 88151.954] (**) Option "xkb_layout" "gb"
try to update the firmware with sudo rpi-update maybe it will fix the error
I'll can try that later today! Could this be related to the update made 17 days ago to exclude the xorg xserver-xorg-legacy package?
SCRIPT UPDATE 2 scriptmodules/ports/fofix.sh @@ -16,7 +16,7 @@ rp_module_section="exp" rp_module_flags="!mali !x86"
function depends_fofix() { - getDepends cmake xorg xserver-xorg-legacy
getDepends cmake xorg }
function sources_fofix() {
install the xorg manual to see if its that
So apt-get install xorg?
or xorg or xserver-xorg-legacy
Thanks for your help. I've tried that it didn't work. I've also tried giving permissions to the xorg folder.
New error after installing stuff and granting some permissions
[336283.856]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[336283.857] X Protocol Version 11, Revision 0
[336283.857] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[336283.857] Current Operating System: Linux raspberrypi 4.14.43-v7+ #1115 SMP Fri May 25 14:27:48 BST 2018 armv7l
[336283.857] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=da63f069-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles plymouth.enable=0
[336283.859] Build Date: 18 October 2017 04:55:30PM
[336283.859] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[336283.859] Current version of pixman: 0.34.0
[336283.860] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[336283.860] Markers: (--) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[336283.862] (==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Tue Jun 5 21:24:49 2018
[336283.862] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[336283.863] (==) No Layout section. Using the first Screen section.
[336283.863] (==) No screen section available. Using defaults.
[336283.863] () |-->Screen "Default Screen Section" (0)
[336283.863] () | |-->Monitor "
[336283.961] (EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.0.log" for additional information.
Same problem here. If i can help (for exampe with new logs) let me know!
Hi, Seems similar to the issue I had with Chromium, fixed following @zerojay steps: https://github.com/zerojay/RetroPie-Extra/issues/196#issuecomment-695793633.
Retropie 4.4 - Raspberry pi3 b + By launching the game, return this error (runcommand.log):
Parameters: Executing: LD_LIBRARY_PATH=/opt/retropie/supplementary/glshim LIBGL_FB=1 xinit fofix
X.Org X Server 1.19.2 Release Date: 2017-03-02 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian Current Operating System: Linux retropie 4.14.30-v7+ #1102 SMP Mon Mar 26 16:45: 49 BST 2018 armv7l Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight =984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=f2d3cb4f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait loglevel=3 consolebl ank=0 plymouth.enable=0 Build Date: 18 October 2017 04:55:30PM xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support) Current version of pixman: 0.34.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Fri May 25 08:39:0 5 2018 (==) Using system config directory "/usr/share/X11/xorg.conf.d" libEGL warning: DRI3: xcb_connect failed libEGL warning: DRI2: xcb_connect failed libEGL warning: DRI2: xcb_connect failed LIBGL: Error while gathering supported extension (eglInitialize: EGL_NOT_INITIAL IZED), default to none (EE) Fatal server error: (EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied) (EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.0.log" f or additional information. (EE) (EE) Server terminated with error (1). Closing log file. LIBGL: Initialising gl4es LIBGL: v1.0.7 built on May 18 2018 08:00:58 LIBGL: framebuffer output enabled LIBGL: Using GLES 1.1 backend LIBGL:loaded: libbcm_host.so LIBGL:loaded: libvcos.so LIBGL:loaded: libGLESv1_CM.so.1 LIBGL:loaded: libEGL.so.1 LIBGL: Using GLES 1.1 backend LIBGL: Targeting OpenGL 1.5 LIBGL: glXMakeCurrent FBO workaround enabled LIBGL: Current folder is:/home/pi xinit: giving up xinit: unable to connect to X server: Connection refused xinit: server error