Opencore Config for Matebook X Pro 2019
OC Version: 0.8.4
Supports Latest Versions of MacOS
This Config is preconfigured with refind, and supports dual boot with windows
Add /BootOC/bootx64.efi into your boot entry and select that to boot.
What works?
- Turbo boost and CPU frequency stage
- Integrated Graphics
- Brightness control
- 40gbps thunderbolt (requires bios tweaking)
- Audio
- Wi-Fi, Bluetooth, Handoff, iMessage...
- Camera
- Touchpad (all gestures working)
- Battery status
- Shutdown / Reboot
- Fn shortcut keys
- S3 Sleep / Wake (Only drops 2-3% overnight)
What doesn't work?
- Fingerprint Sensor
- Nvidia DGPU
What to do before using?
- Generate SMBIOS (MacBookPro16,3) values and add them info config.plist
- Disable CFG Lock
- Change DVMT to 64mb
- Disable Secure Boot
- Disable Thunderbolt safety features in BIOS
Disabling CFG Lock
If you got unnormal cpu boost issue or overheating issue, i recommand to do this.
- Upgrade your bios to 1.28, could be downloaded in PC Manager on Windows.
- Format a usb stick to FAT32.
- Create a new folder named "EFI" in root.
- Create a new folder named "BOOT" in /EFI/.
- Download cfgunlock.zip
- Copy BOOTx64.efi from cfgunlock.zip to EFI/BOOT in your USB.
- Restart and boot with this usb.
- After you boot. Press F12.
- Use ↑ and ↓ in your keyboard to find "CpuSetup".
- Press enter in keyboard to enter "CpuSetup".
You will see this.
- If 0030-0E value is 01 in your computer continue. If it is 00. You don't need this.
- Use ← → ↑ ↓ key to pick it and change to 00.
- Press ctrl and w in same time to save setting.
- Press alt + q to quit.
Change DVMT to 64mb
You will be able to output hdml/dp 4k60p if you change DVMT
Use the same USB that you set up previously in Disabling CFG Lock section, and boot using your USB
- When you're in, press ‘alt’ + ’=‘ to switch to ACPI Variable
- Use pageup/pagedown/arrow keys to find SaSetup
- In SaSetup，use crtl + pagedown to flip to the next page unti the left address displays '0100' as shown below. Note that the first address is 0100
- Change the value at horizontal axis 0100, vertical axis 07 to 02 ，and horizontal axis 0100, vertical axis 08 to 03
- Save with ctrl and w