search

zha-ng / EZSP-Firmware

EZSP Firmware
GNU General Public License v3.0
25 stars 19 forks source link

Firmware request for EByte-E180-Z120B #7

Closed MattWestb closed 3 years ago

MattWestb commented 3 years ago

Its looks like all new EZSP 6.7.8.0 firmware with SW flow control at 115200 is working well also for the EM35X family. For making it easier for "normal" and "not so normal" users it would being better getting all EZSP adapters up and running on 115200 with SW flow control (except tuya ZBGW that Socat is doing the "converting" between from HW in the module side to SW on the ZHA side). Its only EByte-E180-Z120B that still only having 57k6 firmware and bootloader. I have not seen any "sign" that the hardware have problems with higher speed and SW flow control but its easy tested then have cooking on firmware for it. Also if some user is needing the 57k6 its still possible using it. If you is cooking one 115k2 set for it all can using the same default setting in ZHA and making its easier for all users.

I have adding one working method for changing the adapter speed without deleting ZHA and installing it in the Zigpy wiki.

I also recommending changing the default speed for EZSP adapters in ZHA to 115k2 for making its working out of the box then adding the integration in HA.

All is only recommendations but i see its being better for nearly all user is making those changes.

Mvh Mattias.

And great thanks for making all work on ZHA !!

MattWestb commented 3 years ago

Then the latest firmware is having it but not the "standard" 6.7.8.0 dont i closing this issue.