EZSP Development Firmwares

Usage

• Install elelabs-zigbee-ezsp-utility
• Download firmware
• python Elelabs_EzspFwUtility.py flash -p /dev/select/correct/tty-device -f 'path/to/firmware.gbl'

Boards

Elelabs-ELU013 and ELR023

efr32mg1b-bootloader

• EFR32MG13P target
• Standalone Bootloader
• NCP UART TX --> PA0
• NCP UART RC <-- PA1
• Version: 1.10.3
• no DCDC

efr32mg13p-v8-676-sw-115200

• EFR32MG13P target
• NCP Software flow control, 115200 baudrate
• NCP UART TX --> PA0
• NCP UART RC <-- PA1
• EZSP Version 8
• EmberZNet 6.7.6
• no DCDC

efr32mg13p-v8-676-sw-57600

• EFR32MG13P target
• NCP Software flow control, 57600 baudrate
• NCP UART TX --> PA0
• NCP UART RC <-- PA1
• EZSP Version 8
• EmberZNet 6.7.6
• no DCDC

EByte-E180-Z120B

efr32mg1b-bootloader

• EFR32MG1B target
• NCP UART TX --> PA0
• NCP UART RC <-- PA1
• PB12/UART_BUTTON_RESET is bootloader activiation pin/button
• Version 1.10.3
• DCDC

efr32mg1b-v8-676-57600

• EFR32MG1B target
• NCP UART TX --> PA0
• NCP UART RC <-- PA1
• EZSP Version 8
• EmberZNet 6.7.6
• DCDC