-
Hi, I noticed ATmega2561 is not supported but ATmega2560 is. Only difference is 2561 is a 64-pin package.
https://www.microchip.com/wwwproducts/en/ATmega2561
-
I have tried with both ATmega2560 and ATmega2561.
This has never been a problem before.
![image](https://user-images.githubusercontent.com/8218499/114211492-3b85f400-9950-11eb-92cc-878b73e1f724.…
-
For example we change this:
```c
uint8_t *cell_data = (uint8_t *) malloc((NUM_RX_BYT*TOTAL_IC)*sizeof(uint8_t));
// some code between ...
free(cell_data);
```
to this:
```c
uint8_t cell_…
-
I'm looking to include this in the 'official' er9x and also into ersky9x.
I compiled the code for the Arduino and examined the FrSky hub serial data. One of the messages did not end correctly in a 0x5…
-
Watchdog not work!
Atmega328p, Nokia 5110. If Watchdog is triggered then the microcontroller restarts and freeze (or enters the reboot cycle?!). It does not depend whether there is a bootloader or no…
-
I am trying to get 9N1 to work. [1]
Modifying the uart-loop-testcode to use the parity bit does not work.
On sending, TXB8 will be set.
Inspecting the gtkwave file, the parity bit will not be set d…
-
### Work environment
| Questions | Answers
|------------------------------------------------------|--------------------
| OS/arch/bits (mandatory) …
-
A lot of registers give their bits names such as
```
#define PORTB0 0
```
That is mildly useful in such as the *absence* of that definition tells me that this bit isn't used or might be reserve…
-
* r2 version:
```asm
heads/master-0-gffd8ecd
```
* Build environment:
```asm
Final report:
- PREFIX = /usr
- HAVE_LIB_GMP = 0
- HAVE_OPENSSL = 0
- USE_CAPSTONE = 0
- HAVE_FORK = 1
- …
-
_From @JLP69 on September 24, 2015 15:31_
I'm using the Servo library, and I've finding that `detach()` method doesn't work as in the reference. I've reading some post about it. It seems that the …