-
Hi,
are there plans for supporting ATmega4808/4809 (ie Arduino every board) ?
thanks in advance
Giampaolo
-
Hello,
sorry but i cant use GIT properly and i don't know how to make a pull request.
For using a ATMEGA4808 i changed line 18 in util/OneWire_direct_gpio.h to
#if defined(__AVR_ATmega4809__) ||…
-
This is the build output:
Project Type: Application - Configuration: AWS_IOT
Device : ATmega4808
ATmega_DFP (2.4.131)
Compiler Toolchain: XC8 (v2.36) [C:\Program Files\Microchip\xc8\v2.36\bin]
Pr…
-
If one uses the Arduino IDE to load a bootloader (or hex including a bootloader) into a 4808 (perhaps also other chips as well) by default it places the bootload at0x0 and the main program at 0x200.
…
-
Hello !
So, I know that support for `SoftwareSerial` is limited, however I'm having an issue that I think it might be not related to it.
I was wondering if the library is compatible with `Arduino …
-
### Description
OneWire wont work on the new AVR Dx Series chips using board variant from SpenceKonde.
modified \Libraries\OneWire\2.3.7\OneWire\util\OneWire_direct_gpio.h
added condition…
-
-
Hello,
your current avrdude.conf is broken. The previous one without ATmega-DA support works with my ATmega4808.
For example.
avrdude -c jtag2updi -P com9 -p m4808 -v
avrdude: error at C:\a…
-
could one increase PWM resolution to more than 8bit in megacorex on the 4809?
"The TCAn.PER register defines the PWM resolution. The minimum resolution is 2 bits (TCA.PER = 0x0002), and the
maximum…
-
Normally fuse bits are defined like
```
#define FUSE_SOMETHING (unsigned char)~_BV(some_n)
```
For the list of parts below gcc v12 defines a lot of them *without bit inversion* `~`
```
atmega1…