-
### What do you want to implement?
I want to implement an Audio Output Amplifier.
### Why do you want to implement this?
I want to implement this feature so you can listen to stations using a loud…
-
I want to suggest an option for the DSP processor. I am using this for a multi-room audio setup and in some rooms I have a single speaker. It would be very good to be able to merge both left and right…
-
**Describe the problem you have/What new integration you would like**
Please look at adding standardized volume control configuration for external DACs with integrated [PGA (Programmable Gain…
Hedda updated
2 weeks ago
-
Going over the design once more, I realized that the LM1875 is not spec'ed below 16Volts so we can't expect much output. Some alternatives:
1. Leave the amp off altogether and use an external unit o…
-
When I have Bluetooth applet loaded and I connect to my amplifier I cannot select this amplifier as audio sink in sound settings. Everything works correctly when I unload Bluetooth applet and use blue…
-
Due to i have troubles with my amplifier, loosing audio link when bugfering between 2 chapters i want to disable "use chapters" in the settings. But after this change it's not possible to start a show…
-
Hojo reported that he finds it difficult to hear audio from the MEGA65 as he uses hearing aids and the volume levels are quite low.
He has tried using the "Audio Amplifier Off/On" setting in the co…
-
The following corrections should be made to make the device function:
* GAIN_SLOT should be connected with a 100k resistor to Vcc (to set gain at 3dB to avoid overloading the power supply)
* The NC …
-
In order to transmit signals underwater, we will need to design a somewhat high power amplifier.
Your task is to design an Audio amplifier with 200kHz of bandwidth, capable of delivering up to 2W o…
-
Device and serial number: MB1, EED10261800180
ExpertSDR3 version and build number: 1.0.7 beta
OS: Windows 10/ macOS/ Linux Ubuntu – under which OS you have confirmed the issue: Windows 10 Pro 22H2
…