-
**sim 2: Using GRASP**
1. _Geometrical model of the instrument_
- compare different spherical cuts
2. _Distort the beam by using feed displacement_
3. _change the size of the reflector to di…
-
**Sim 1: Using OSKAR**
1. _Geometrical model of Kutunse dish_
- Consider the dish as a collection of dipoles;
- Assume the radial distribution of the dipoles to be a Super-Gaussian; (Note: This…
-
After working with user on Ticket 3017, the following enhancements to the active beam modelling feature are recommended:
1) Allow hot and chilled water coils to be simulated in the beam (this was a…
-
On [the MicroED biotin tutorial dataset](https://dials.github.io/documentation/tutorials/3DED/Biotin.html), I was playing with various refinement strategies (`DIALS 3.dev.614-gab2c5050e`). I noticed t…
-
I have generated some beams on https://flwe.nl/ppBricks/ and imported the stl files in tinkercad.com to make some 3d objects beam compatible. However beams look good in prusaslicer, but quite terrible…
-
Here is a list of possible ideas:
# Lid Driven Cavity with flexible bottom
One possible approach for modelling this would be a simple Bernoulli Beam for the bottom (inhouse python?) + Lid Driven…
-
-
csv files may be left over from code v1 and is not compatible or read in correctly. Cannot be certain the correct linear/circular polarised fractions are output using the csv file. Use the .dat files…
-
Using 22.5 IFC exporter (unsure if it was a problem with earlier version) it seems that the steel fabrication element generated when using steel connections does not have the correct end points when e…
-
We will need a few standard measurement sets to test calibration routines. These should include:
* a long observation at a high-declination field with a bright calibration gain/amp source for develo…