-
## Общая информация
* **версия Home Assistant**: 11.2 (Core 2023.12.3)
* **способ установки Home Assistant**:
[x] Home Assistant OS
* **версия компонента**: 4.1.6
* **модель бризера**: …
-
На данный момент компонент использует не совсем корректные типы данных в атрибутах fan_mode (float) и fan_modes (смесь из int/str).
Согласно коду Home Assistant в этих атрибутах должны быть **исклю…
-
Hi there!
First of all, thanks for your project, it's been working perfectly stable!.. until today, when the short circuit happened in my flat and the entire electrical system was down. After restori…
-
@gfwilliams I'll add my overall feedback about the hardware here (I'm sure there's a nice earner in this as a kit with some challenges for the purchaser). Overall I'm super impressed, it's a very clev…
-
-
## Общая информация
* **версия Home Assistant**:
* **способ установки Home Assistant**:
[ ] venv
[x] Docker
[ ] Home Assistant OS
* **версия компонента**: Home Assistant 2022.9.…
-
@gutosurrex e @simas0,
Vocês conhecem livros com layout bonitos escritos a partir do Sphinx?
Encontrei estes, mas o layout é espartano:
http://www.theoretical-physics.net/dev/index.html
h…
-
Thanks for developing e2g.
After updating MODx to 1.2-d9.0.5 by dmi3yy the old version of e2g wasn't work. So i update it also. But some problem appeared. Before gallery tumbnails i print descript…
-
## Общая информация
* **версия Home Assistant**:2022.7.2
* **способ установки Home Assistant**:
[ ] venv
[*] Docker
[ ] Home Assistant OS
* **версия компонента**: 3.0.0
* **мо…
-
👋 Hi there,
is it possible to control multiple breezers only with single board? It seems not supported by configuration yaml?
I've had a 4 x Tion Lite with externals CO2/Temp sensors. I would lik…