-
I've just noticed that if I leave my L13 unplugged and asleep but not shutdown overnight, the battery is totally flat in the morning.
As far as I can tell, it goes to sleep properly (screen off, po…
-
Looked into it some and the CPUFriend Documentation says that if you're not sure then it probably isn't required. I'm having fans running a lot though, and the NUC seems to be generating more heat tha…
-
I want to do a custom CPU Power Managment,
After using this "**git clone https://github.com/fewtarius/CPUFriendFriend; cd CPUFriendFriend; chmod +x ./CPUFriendFriend.command; ./CPUFriendFriend.comma…
-
- [ ] OpenCore 1.0.2
- [ ] AirportBrcmFixup 2.1.9
- [ ] AppleALC 1.9.2
- [ ] Lilu 1.6.9
- [ ] VirtualSMC 1.3.4
- [ ] HibernationFixup 1.5.2
- [ ] CPUFriend 1.2.9
- [ ] DebugEnhancer 1.1.0
- [ …
-
Without CPU Friend I get significant better results in Geekbench.
I think CPUFriend is not necessary.
-
https://blog.daliansky.net/CPUFriend-Installation-and-Usage.html
CPUFriend安装和使用 系统要求CPUFriend 需要macOS ***v10.8***或更高版本 安装强烈建议让引导程序注入CPUFriend,否则您将需要LiluFriend,以确保CPUFriend正常工作。 可用的内核标志添加-cpufdbg以启用…
-
This processor is running at lower speed in MacOS than in Windows.
Using CpuTolopolyRebuild without CpuFriend ( because I am getting even lower performance with CpuFriend )
Under MacOS getting th…
-
Hello everyone, and congratulations for the great work you have done here.
I have a problem and that is that the CPU is maintained most of the time at 800MHz (minimum frequency), even with the powe…
-
Hi there.
When I watch videos or decode the GPU will go up to 4.0Ghz, sometimes it will reach at 7.0Ghz few seconds. then the CPU Frequency goes down to 400~800Mhz.
at the same time, the video sti…
-
主板一样,CPU是i5-8400,显卡是RX590,已删除CPUFriend.kext,去掉启动参数就正常