-
First, thanks for the brilliant packages.
My zed-f9p firmware version is 1.32 and I don't want to change the firmware version.
![image](https://github.com/MapIV/eagleye/assets/80484903/9e92d8c1-b…
-
I'm using the SIYI MK32 GCS and building the current master using Android arm64_v8a as the target.
Currently when I connect the F9P RTK base module to the GCS, the RTK icon is showing up but seems th…
-
Getting the module running with the u-center software is trivial. Set credentials for an NTIRP server also works, once I find one that is active. rtk2go.com:2101 using location MWERP (near NYC) lock…
-
**Describe the bug**
A clear and concise description of what the bug is that I used UBlox ZED-F9P and recently I use ntrip caster here: https://github.com/LORD-MicroStrain/ntrip_client/issues/29#issu…
-
I would like to know hot to enable NavTIMEUTC topic from a f9p ublox GPS
-
In doing some F9P stress/consistency testing, I discovered the RelPosNED F9P is sending a message that is too long when starting up and it doesn't have a stable position yet. I am checking for bad che…
-
**Describe the bug**
Using a ZED-F9P with the latest firmware available on the ublox website. Launching the drivers with the following configuration file leads to the error (shown after cfg)
``…
-
### Describe the bug
Using a Non PX4 CAN Node GPS, such as the Holybro DroneCAN F9P (Uses AP Periph). These Parameters that are required for CAN GPS Heading are not available in the **Component ###…
-
-
Hello:
First, thanks for an awesome project!
I was testing using the sparkfun breakout Zed F9P, and all was good and stable, but that is a prototype board....I wanted something more permanent. …