-
I'd be incredibly grateful if someone could share some additional examples or resources that would be helpful for someone in my situation. (I don't have a programming background/just edit and run …
-
Do you have a heat pump that works but isn't [on the supported unit list](https://muart-group.github.io/user/supported)? Give us some information about it here!
When submitting a heat pump report, …
-
Target temperature: 20
Lower limit: 18
Upperl limit: 22
As seen in the picture the house is heated up to almost 23°C when simulating with a cylindrical storage at the house without an EnergyM…
-
# Log Message
I have created a config file for a heat pump device pw58330 from the PowerWorld company.
# Information about DPS mappings
Config file (yaml) attached as txt file:
[powerworld_pw…
-
Hi :)
I am desperately looking for a way to connect to my heat pump and read out data via python but all python modules I found so far only support type 0xAC devices. However, my heat pump is of t…
-
Hi,
does the integration support heat pumps like Kołton for example? That pump uses TECH eModule platform but not sure what physical module is installed on the device.
Thanks
-
The urban central heat balance is currently containing some unplausible elements:
- [ ] High investments in gas boilers until 2030 (likely to be fixed after solving https://github.com/PyPSA/pypsa-ar…
-
In the installer menu on the heat pump, it's possible to set the pumps speed (I have a Water/Water heat pump, so I can set the speed of the pump towards the heat source; and of course the speed of the…
-
In reference to https://github.com/emsesp/EMS-ESP32/discussions/1678#discussioncomment-9236392 and https://github.com/emsesp/EMS-ESP32/discussions/1600
-
Rule description:
> System 2 and 4 - Electric air-source heat pumps shall be modeled with electric auxiliary heat and an outdoor air thermostat. The systems shall be controlled to energize auxilia…