-
Hello guys!
I just got two of this 128x64 P2 (P2-1515-128x64-32s-S2) led metrixes from AliExpress and after testing with all the settings I could not make ir work, both of them. Not even random col…
-
Hi and thanks a lot for inputmodule-rs!
In case I haven't missed anything, there's no way with `inputmodule-control` to set individual pixels on the LED matrix.
Optimally, users could pass a lis…
-
## Panel description
#### Dimensions (in pixels) : 160x80
#### Scan factor: 1/40
#### Chips on rear side: FM6363C, 74HC245KA
https://vi.aliexpress.com/item/1005005326933468.html?gatewayAdapt=glo…
-
Hello,
I will receive an esp32-a1s card soon.
I want to add an LED matrix to display a clock. For example, an 8*32 WS2812B matrix. Is this compatible with squeezelite-esp32 ?
Thank you in advance
…
-
### What happened?
The soap effect malfunctions and occupies on a small subset of pixels when custom led map contains gaps between each row. The image below shows the difference between "soap" and a …
-
Hey,
I wanted to say that I found it pretty easy to use your config with some of the linked resources to build and flash my keyboard, and I can confirm that all of the under-key lighting is working a…
-
I am experiencing issues while using a 4x3 matrix display connected to a single Adafruit HAT. The display shows two different colors inconsistently. Additionally, when I attempt to increase the panel …
-
Hey all, sorry I know this is not the right place to post this, but I have been struggling for almost two days straight.
long story short I bought a p3(2121) 64x64 1/32S waveshare
(https://www.wa…
-
Figure the scematic for the led matrix. Use shift registers and resistors. Make it fit ontop of the tiny ml
-
I'm currently working on a MIDI sequencer project using a 16x32 RGB LED matrix in conjunction with a Raspberry Pi Zero (original 1.3). I've opted for the python bindings of this library to control the…