-
Para empezar tengo ya varias placas configuradas con tus ejemplos y funcionan a la perfeccion. Gran trabajo
Estoy mirando hacer que una esp32 este conectada al bus nmea2000 por uart0 por ejemplo y po…
-
Hardware support for NMEA2K using a cheap ~~SN65HVD230~~ TJA1050 Chinese board.
NMEA2K cable can provide 12v to the m5stack and the ~~SN65HVD230~~ TJA1050 can translate the CAN messages to be readab…
-
Hi,
I'm using this plugin in a NMEA2k network with B&G displays and plotter, with SignalK running on a Rasperry Pi with a MCP2515 CAN hat. I can get SignalK to output NMEA2k data fine, but when it …
-
The global variable gVar (Magnetic variation) is set from instrument input even if the WMM plugin is available and enabled.
If WMM is disabled and a user variation entered this value is also not used…
-
Hello, I have installed the plugin from signalk , but I dont know to make it work...
My objetive is to send data that I have in signalk to the NMEA2000 net so I can see the Data using a B&G displa…
-
`NMEA0183ParseROT_nc` and `NMEA0183SetROT` deliver/expect radians as angle unit. But the change rate is still per minute. I think this should be converted to 1/s to keep in line with SI and what NMEA2…
-
When i keep my nmea2k bus running and change my PGN's is there a nice way to "push" out changes to the network when i update my program ? currently running with an ESP32. seems to me like my "open" sh…
-
Hi: I am modifying your code for a depth sounder and it seems like it might work, but it's gotten into a perpetual reboot cycle, where it reboots every 10 seconds or so. When it's not receiving NMEA2k…
-
I have received the SH-ESP32 Development Board SKU:sh-esp32 and, following the instructions contained in the below link, I have uploaded the firmware.
https://docs.hatlabs.fi/sh-esp32/pages/tutorial…
-
In my config GPS derived info (position etc.) is forwarded to other instrumentation by Signalk server. Everything is ok with NMEA0183 devices (thru the Signalk to NMEA183 plugin) but NMEA2K instrument…
dpazz updated
4 months ago