-
I've built a Capture sample from Zephyr repository for SAM E70 and tried to use it in Renode. Shell works just fine until I use any command that is related to net functions.
Sample GitHub page:
[htt…
-
Hi
Thanks for the library. I had to change it a bit to make it work on my board, Atmel sama5d3 xplained with kernel 5.4.
To enable GPIO E14 as an output I do:
`echo 142 > /sys/class/gpio/export…
-
I can't get things to compile for the ecp5 architecture.
I am using a recent (last week or so) build of oss-cad-suite to do the synthesis. synthesising fails with the following error message:
`…
-
Hello,
Copied your example from [your blog post](https://www.ics.com/blog/gpio-programming-exploring-libgpiod-library), and stored it in the file `~/blinky_c/blinky-i.c`. Tried compilation as follo…
-
### Board Name
Raspberry Pi 5
### Steps
When following the following steps on the raspberry pi 5:
```py
pyenv virtualenv system test
pyenv shell test
pip install --upgrade Adafruit-Blinka
``…
-
During large probing sessions the back move is apparantly not executed correctly and motion continues to bed. Popping probe up to inactive state. (In this state it reports H as if it was triggered.)
…
-
I am trying to use an LVDS differential pair as input. In my .LPF file, I have the following:
```
LOCATE COMP "tmds_c_p" SITE "F2";
IOBUF PORT "tmds_c_p" PULLMODE=UP IO_TYPE=LVDS;
LOCATE COMP "t…
-
All I want is to run Boiana_Eq code with DUE + Elechouse TFT shield for Due V2.1 + TFT_320QDT_ILI9341 - 320x240 screen.
Boiana_EQ code: https://drive.google.com/drive/folders/1no3Nnc6ZwLjqzFxb2D6PBbd…
-
Building LiteX for the ULX3s-12F fails because it uses 58/56 DP16KD cells. I haven't been able to find a way to reduce this.
```
$ python3 -m boards.radiona_ulx3s_ex --device LFE5U-12F --sdram-modul…
-
The design below crashed both my old, self-built, nextpnr-ecp5 and the current version from https://yowasp.org/
(I apologize for my contorted attempt at forcing yosys to keep my ring oscillator -- im…