-
**Project:**
Helium Arduino PortentaH7 Lora Vision Shield Tutorial for Non-Engineers
**Note:** I have reduced the scope of this grant and removed the Sensor/Actuator and Machine Learning compo…
-
As far as I can tell, WiFi, BLE and Ethernet only work when activated from the M7 core. Can someone clarify if any of these 3 can be run from the PortentaH7 M4 core, (using RPC if Serial print is need…
-
I noticed some time ago that even if all codes, coming from Dynamixel2Arduino or DynamixelShield, compile well, in the end there is no way to find the dynamixel attached to the system Portentah7+MKRDy…
-
Hi.. I am looking to cascade 1 ad5242 1mohm digipot and 2 ds1804 100k (https://www.analog.com/media/en/technical-documentation/data-sheets/DS1804.pdf).
is this doable?
additionally can 20 such s…
-
I am using the pin A0 (PA0_C) of the Portenta which is linked to the ADC1_INP1 when I use it alone it does its job properly and convert the signal to digital values. The code for ADC :
```
void ADC…
-
When is the Opta going to be included with the Lauterbach Trace32 debugger? Or is there a way now to get it registered?
https://repo.lauterbach.com/register_arduino.php
I don't even own an O…
-
I have tried to use this OTA library with MCUBoot as bootloader but I have the following error message:
```
Higher version bootloader required to perform OTA.
Please update the bootloader.
File …
-
Please Update the LongFi Library to include The New Arduino PortentaH7 Vision Shield LoRa version.
https://store.arduino.cc/usa/portenta-vision-shield-lora
Clips onto the https://store.arduino.c…
-
I attached upwards female headers on my Arduino PortentaH7 so that the Vision shields can also plug into it using the bottom located 80 pin HD connectors. (Female headers facing up would be a good pur…
-
My PortentaH7 does not seem to work with the MKR-GPS
See issue filed at the mrk-gps github [MRK Format Portenta issue with MKR-GPS](https://github.com/arduino-libraries/Arduino_MKRGPS/issues/23…