-
The ability to download pre-built firmware that works on your Makerbot is one of the best features of ReplicatorG. To do this for RepRap is a bit more difficult since there is much more variation in e…
-
Trying to configure S42B v1.1 with Duet Reprap Firmware v3 Timing/Pulse
This is what I am using now
M569 P8 R0 S0 T3.33:3.33:3:0
What settings should I be using for the S42B v 1.1 ?
Refere…
-
Hi Michael,
Thank you for the site - it works wonderful if you have Marlin. I have recently changed to a Duet2 setup, and now the acceleration/jerking pages are an issue as the commands are differe…
-
Any way to get this to work with a RepRap machine?
I replicated the printer config file to match my RepRap printer's settings. But when I go to create a gcode file I get Error I/O 32.
Any future p…
-
### What happened?
**Behaviour**
The "Start G-code" ignores M106 when expressed as a decimal number between 0 and 1:
![M106](https://github.com/user-attachments/assets/8c6a6df2-5aef-4fbb-969f-30b…
-
I was wondering if any plans to enable this to monitor prints directly from a printer running RepRap Firmware (I.e. on a Duet) without having to have a Pi running Octoprint acting as a middle man?
…
-
[https://reprap.org/wiki/RepRap_Firmware](https://reprap.org/wiki/RepRap_Firmware)
and perhaps talking to DC42 in the forums @ [https://forum.duet3d.com/](https://forum.duet3d.com/)
Duet3d has an ex…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I enable LASER_FEATURE and LCD laser Menu on my Bigtreetech (BTT) Octopus Pro V1.0 boar…
-
See http://forums.reprap.org/read.php?245,516838,517132#msg-517132 , a first success of the announcements. German, but messages are copy&pasted.
With Configtool:
> F:\Program Files (x86)\Arduino -c …
-
The Craftbot firmware has some small differences causing print3d to hang. For example "M104 S200" returns ok wíth temperature which is different from Marlin. Here's (http://reprap.org/wiki/G-code#M104…