-
Hi,
I'm trying to read ultrasonic distance sensor A02 / RS485 modbus data via T-CAN485.
https://wiki.icbbuy.com/lib/exe/fetch.php?media=developmentboard:a02-output-interfaces.pdf
But I'm not ab…
-
hi, i have 1.0.5 version of rs485 and i am having issues with responses.
i can calibrate the motor read the encoder and do all sort of things but when i try to move it in position mode or read the mo…
-
Hello!
At the moment I have encountered a problem with rs485/modbus. First, I will describe the situation in detail.
I have a small network of rs485/modbus sensors connected to the same physical…
-
Hi, I would like to make this work on ESP32. I was able to get it compiled but I am not sure of GPIO vs RS485 and pentair controller.
ESP32 GPIO 45, 46 as RX/TX
45 to 485 TXD
46 to 485 RXD
R…
-
Hello, maybe there is an instruction for connecting waveshare somewhere? I have ‘bms rs485’ and ‘inverter rs485’
-
Hi, I have a JK B2A8S20P with a JK RS485 adapter (GPS UART port to RS485 port), it is working OK on windows with JK monitor app. I have configured on linux your configurator, tried to use ID 0 and 1, …
-
### Version
- [X] I am using the latest version
### Aircraft
KA-50 BS3
### Control
----
### Description
I'm using 3 MAX daisychained (2 custom boards: double MAX and a single MAX,…
-
Hey,
after having only used the optical interface so far, I tested today a new Meter (Holley DTZ541) and connected it via a RS485 to USB Serial Adapter.
Every single Frame shows an CRC Error, so…
-
I am trying to communicate with the BMS in a battery over RS485 but do not know the protocol details. I tried to load the aia file on Kodular to find out but I get errors loading the blocks when I do …
-
### Wiki Search Terms
Set up config with laser and spindle
### Controller Board
XPro V5
### Machine Description
Workbee dual y with spindle rs458
### Input Circuits
_No response_
### Configura…