-
I use this library only for scanning QR codes on images in my vue.js project. For scanning these images it would be great to have a scanImage method as otherwise I always need to create File instances…
-
Dear Mini2P developers,
We have the A3I12.2 (MEMS-L, max mechanical angle $\pm 5.1°$) and the T180 driver. I realized A3I12.2 has Vbias=80V and T180 driver is biased at 90V, they should work but ju…
-
Hi,
We are trying run our scan image files through the pipeline and need to create a new load function. We have adapted the Matlab version of suite2p to load the scan image files but are wondering…
-
This is an ongoing data collection, based on the examples that we received from Shiva we have the following source data:
# Source data
- Raw imaging acquired with ScanImage
- single plane, s…
-
**Describe the bug**
When scanning using grayscale I get very noisy output
**To Reproduce**
Steps to reproduce the behavior:
1. Configure scanner to use grayscale mode
2. Scan document
…
-
It seems to me that accessing SI TIFFS with, say, 8 depth and 3 channels at 1024 x 1024 is slower than I'd expect. So I should look into approaches for speeding this up.
-
* Image pollen grain
* Move stages by a small quantity
* Image again
* Measure translation shift
* Calculate microns per pixel
* Compare with ScanImage value that we have already set.
-
4deeabfc6b2ee77782f4b8ca64cd4228b8338750
Relies on the user creating structures:
```
>> laserPower
laserPower =
struct with fields:
wavelength_in_nm: 800
…
-
I suggest we continue to calculate the offset for the moment, in case the ScanImage value is for reason problematic. In the mean time I will do the following:
* [x] Enforce the automatic offset cal…
-
Hello @SimulPiscator,
my Samsung SCX-3400 is not automatically detected by airsaned.service (systemctl) when I turn it off and then on. `scanimage` can detect it normally (sometimes after few seconds…